563100
32
Zoom out
Zoom in
Previous page
1/81
Next page
Paper handling > 32
11. Push both paper guide locking levers (6) upward into the locked position.
12. Push the paper set lever gently backward into the SET position.
13. Attach the front sheet support (3).
L
OADING
THE
OPTIONAL
ROLL
PAPER
STAND
(ML5720/ML5790)
1. Set the Paper Type Lever to RPS.
2. Open the Top Cover and adjust the Paper Thickness Lever to suit the paper. See
“Setting the Paper Thickness lever” on page 33.
3. Open the paper separator all the way.
4. Remove the paper roller.
Note that there is a disk on the left end of the roller.
5. Slide the roller into a tube of paper.
Ensure the disk is on the left side and paper must roll up from the bottom.
6. Replace the paper roller back into the stand, with the disc on the left side.
CAUTION!
Ensure that the paper set lever is closed (towards the SET position)
before printing with the CSF. If it is left open, the friction rollers
will not be able to feed the paper, and the printer will print on the
platen and may damage the printhead and platen.
NOTE
For installation instructions, see “Installing the Roll paper stand (ML5720/
ML5790)” on page 75.
1. Roll Paper Stand
2. Paper Shaft
3. Paper Separator
4. Tension Bar
5. Paper Guide
1
2
3
4
5
5
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5720 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info