563100
13
Zoom out
Zoom in
Previous page
1/81
Next page
Getting started > 13
2. Switch off the outlet power (1a) and then unplug from the power outlet (1b).
3. Unplug the power cable connector (2) from the printer (3).
P
RODUCING
A
TEST
PRINT
To check that your printer is operational, produce a test print on a sheet of 80 gsm A4 paper
(for example) as follows:
1. Turn the printer Power Switch to OFF.
2. Set the Paper Type Lever to cut sheet and set the Paper Thickness Lever to position
1.
3. Press and hold the SEL and LF/FF button and turn the Power Switch to ON. The SEL
LED will flash.
4. Press and hold down the LF/FF button and then press the LOAD/EJECT button again.
The alarm indicator should be illuminated to indicate that there is no paper in the
printer.
5. With the long side of the paper against the paper guide, insert the paper carefully
into the printer. The printer will automatically grip the paper.
6. The printer will start the test print.
CAUTION!
> Allow at least 5 seconds between turning the printer ON after
turning it OFF. A shorter time interval between turning ON/OFF
operations may cause printer power failure.
> Do not turn the printer OFF while it is printing as this may result
in damage to the print head.
NOTE
Ensure that the ribbon cartridge is properly installed before printing a Test
Page.
NOTE
If required, you can pause the test print by pressing the SEL button and then
resume the test print by again pressing the SEL button.
1a
2
3
1b
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5720 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5720 in the language / languages: English as an attachment in your email.

The manual is 5,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info