492942
18
Zoom out
Zoom in
Previous page
1/95
Next page
USING YOUR PRINTER > 18
TEMPORARILY CHANGING THE TOP OF FORM
To move the Top of Form position lower for one page only:
1.
Press
SEL
to deselect the printer.
2.
Press
LF
to lower the position of the Top of Form.
RESETTING TOP OF FORM TO THE FACTORY DEFAULT
The factory default setting for the Top of Form (where the printing
should begin) is 1" down from the top of the page.
To reset the Top of Form to the factory default:
1.
Remove paper from the paper path.
2.
Turn the printer off.
3.
Press and hold
PARK
+
QUIET | TOF
while turning on the
printer.
4.
Reload paper.
FORMS TEAR-OFF FEATURE
This feature is normally turned off. To use Forms Tear-Off, you must
enter the menu and change the setting to the desired time interval
(see Changing the Forms Tear- Off Settings).
The Forms Tear-Off feature allows a printed continuous forms page to
be torn off without wasting paper or adjusting the printer. It can be
used for rear feed continuous forms, bottom feed continuous forms
(with the optional push tractor installed), or for top feed roll paper
(with optional roll paper stand installed).
When the printer is turned on, the paper feeds to the tear-off position.
CAUTION!
Do not use the platen knob to change the Top of Form. If you turn the
platen knob when the printer is not at Top of Form, the TOF will
misalign. Always feed the paper to TOF before turning the platen knob!
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML5520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML5520 in the language / languages: English as an attachment in your email.

The manual is 5,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info