665248
4
Zoom out
Zoom in
Previous page
1/2152
Next page
ii User’s Guide
Place the printer on a firm, solid surface. If the printer is placed on
something unsteady, it may fall and become damaged or injure
someone. If the printer is placed on a soft surface, such as a rug,
sofa, or bed, the vents may become blocked causing the printer to
overheat.
Do not put the printer on or near a heat source, such as a radiator or
heat register. Keep it out of direct sunlight. Allow enough room
around the printer for adequate ventilation and easy access.
Do not use the printer near water, or spill liquid of any kind into it.
Make sure that the power source matches the rating listed on the
back of the printer. If you are not sure, check with your dealer or
with your local power company.
This printer has an earthed, 3-pin plug as a safety feature and will
only connect to an earthed outlet. If this plug cannot be connected
to a power outlet, then it is possible that the power outlet is of the
older, non-earthed type. Contact an electrician to have the power
outlet replaced. Do not use an adapter to defeat the earthing.
To avoid damaging the power cable, do not put anything on it or
place it where it will be walked on. If the cable becomes damaged
or frayed, replace it immediately.
If an extension cable or power strip is being used with the printer,
make sure that the total of the amperage rating required by all the
equipment is less than the rating of the extension cable or power
strip. The total ratings of all equipment plugged into the outlet
should not exceed 13 amperes.
The power outlet into which the printer is connected must remain
accessible at all times.
Opening any cover may expose hot surfaces. These are clearly
labelled. Do NOT touch them.
Do not poke anything into the ventilation slots on the printer; you
could get a shock or cause a fire.
Aside from the routine maintenance described in this user’s guide,
do not try to service the printer yourself. Opening a cover may
expose you to shocks or other hazards.
Do not make any adjustments other than those outlined in this
user’s guide as damaged may be caused to the printer.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML4410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML4410 in the language / languages: English, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info