665247
206
Zoom out
Zoom in
Previous page
1/212
Next page
Communication procedures
Two
types of communication
procedure
for RS-232C serial inter-
faces can be selected via
the
menu.
These procedures
or
protocols
arc briefly described below.
Ready/busy protocol
The
busy
signal
turns
on
when
the space
in
the
interface buffer
becomes less
than
256 bytes. The
busy
signal
turns
off (becomes
Ready) after
200
ms
or
1 second has passed if the recovery
has
occurred within 200
ms
or
1 second.
If
the timing
of
recovery
exceeds
200
ms
or
1 second, the
busy
signal turns off (becomes
Ready) immediately after
the
recovery has occurred.
XON/XOFF protocol
This protocol uses
the
ASCII characters DC3 (decimal19)
and
DC1
(decimal17) as follows. The DC3 will
be
sent
to the transmission
side
immediately after the
room
in the interface buffer has become
less than 256 bytes to inform that receiving is impossible.
The
transmission
of
DC3 stops
when
the data receiving
has
stopped.
If
the timing
of
recovery of 256
bytes
is within 200
ms
or
1 second after DC3 is sent, DC1 will
be
sent
200
ms
or
1 second after
the recovery to inform
that
receiving is possible again.
If
the
timing of recovery exceeds 200
ms
or
1 second, the DC1 is
sent
immediately after the recovery has occurred.
200
ms
or
1 second
busy
time for
both
protocols can
be
selected
by
menu.
Int
erfacing C
-1
1
206


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML3410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML3410 in the language / languages: English as an attachment in your email.

The manual is 19,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info