492966
99
Zoom out
Zoom in
Previous page
1/148
Next page
6 – 2
6.3 Lamp Display
(1) Printer mode display
Table 6.2
Note:
BLINK1 : 400ms ON, 400ms OFF
BLINK2 : 200ms ON, 200ms OFF
: LED is kept in Current Condition (no change)
(2) Fault alram display
When the printer detects any of the various alarm states, the information is displayed as
shown below on the operation panel. The alarm is specified by lamp combination of PRINT
QUALITY and CHARACTER PITCH. (See Table 6.3 for details.)
SEL
SEL
MENU
SHIFT
LF
Micro Feed
Down
FF/LOAD
Micro Feed
Up
TEAR PARK QUIET
TOF
EXIT
POWER
ALARM
GROUP ITEM SET
MENU
PRINT
PRINT QUALITY
CHARACTER PITCH
LQ COURIER
UTILITY PRESTIGE
RESET
10
17
12
20
15
PROP
GOTHIC
BOLD
– ROMAN –
– SWISS –
Figure 6-1
ALARM
CATEGORY
ALARM
LED CONDITION
CONTENTS
TROUBLE
SHOOTING
ALARM SEL MENU 10CPI 15CPI
OPERATOR
ALARM
Paper end alarm ON OFF
From, cut sheet or bottom
paper end
Set New paper.
Paper change
lever alarm
ON OFF
BLINK
1
OFF
Change lever is set to TOP
position while paper is
already inserted from rear or
bottom.
• Set the lever to specified
position.
• Check rear sensor lever.
• Replace Control Board
Paper jam alarm ON OFF OFF
BLINK
1
• Cut sheet could not be
ejected.
• Cut sheet could not be fed
properly
• Remove the paper or check
feed Mechanism
• Press SEL key.
Print Head
thermal alarm
OFF
BLINK
1
——
Print head temperature
exceeds 119°C
• Wait until it is cooled.
• Replace P.H. or Driver
Board
Space motor
thermal alarm
OFF
BLINK
1
——
Temperature of space motor
exceeds specified value.
• It is recovered automatically
• Replace SP motor or Driver
Board
FATAL ALARM
BLINK
2
OFF OFF See Table 6.3
Hardware Alarm has
occurred.
See Table 6.3.
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML3390 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML3390 in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info