665225
92
Zoom out
Zoom in
Previous page
1/108
Next page
ML1120/ML1190 eco User’s Guide – Troubleshooting > 92
Improper continuous forms feed.
No line feed, and no
paper feed.
Paper is off the Pin
Tractors.
Reload paper correctly.
The adjust lever
position does not match
the paper type.
Set the adjust lever to
the correct position.
Paper distortion or jam. Forms are loaded with
their left holes out of
line with the right ones.
Load forms with their
left holes in line with
the right ones.
Inadequate distance
between the left and
right Pin Tractors,
making for loose paper.
Relocate the Pin
Tractors to tighten the
paper.
Paper movement is
blocked.
Remove the blockage.
Paper source is too far
from the printer.
Move the paper source
nearer to the printer.
Paper not specified for
the printer.
Use paper types
specified for this printer.
Several blank lines
appear in the printout.
Skip over perforation
spacing is selected.
Cancel the skip over
perforation spacing.
The selected skip over
perforation spacing
does not match the
physical tear-off
perforation positions.
The paper length
selected in the
application does not
match the physical
paper length.
Match the paper length
selected in the
application with the
physical paper length in
use.
Select the paper length
in number of lines in the
application.
Abnormal switchover between cut sheet and continuous forms modes.
No cut sheet feed. The printer is in
continuous forms mode.
Set the Paper Type lever
to cut sheet mode.
No continuous forms
feed.
The printer is in cut
sheet mode.
Set the Paper Type lever
to continuous forms
mode.
Paper feed operations
for both cut sheets and
continuous forms are
actuated.
The cut sheet is not
ejected.
Eject the cut sheet.
PROBLEM CAUSE ACTION
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML1120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML1120 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info