665225
53
Zoom out
Zoom in
Previous page
1/108
Next page
ML1120/ML1190 eco User’s Guide – Operating instructions > 53
C
ONFIRMING
CURRENT
SETTINGS
To print the current menu settings, use a cut sheet of A4 paper
or continuous forms of width at least 254 mm. In this example,
a sheet of A4 paper is used.
1. Set the Paper Type lever to cut sheet mode.
2. To activate menu mode:
(a) Ensure that the printer is powered OFF.
(b) While holding down the SEL button set the printer
Power Switch to ON.
3. Place the cut sheet on the Paper Tray. The printer prints
the firmware details.
4. Press the TEAR button to print out the current menu
settings.
5. Exit or proceed to change menu settings:
(a) To exit menu settings confirmation, save the current
settings and eject the paper, press and hold TEAR,
then press LOAD/EJECT and then LF/FF.
(b) To change menu settings, see “Menu setting” on
page 53.
M
ENU
SETTING
Set menu item values (printed out for reference as you proceed)
as follows:
1. While holding down the SEL button set the printer Power
Switch to ON.
2. Place the cut sheet on the Paper Tray.
3. Press SEL (or TEAR and SEL together) to step forward
(backward) through the main menu.
NOTE
Before changing menu settings, you may wish to print the
current menu settings as in “Confirming current settings” on
page 53.
53


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML1120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML1120 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info