665225
14
Zoom out
Zoom in
Previous page
1/108
Next page
ML1120/ML1190 eco User’s Guide – Getting started > 14
P
RODUCING
A
TEST
PRINT
To check that your printer is operational, produce a test print on
a sheet of 80 gsm A4 paper (for example) as follows:
1. Turn the printer Power Switch to OFF.
2. Set the Paper Type Lever to cut sheet.
3. Remove the Access Cover and set the Paper Thickness
Lever to position 1.
4. Press and hold the LF/FF and the LOAD/EJECT buttons and
turn the Power Switch to ON. The ALARM indicator should
be illuminated to indicate that there is no paper in the
printer.
5. With the long side of the paper against the paper guide,
insert the paper carefully into the printer. The printer will
automatically grip the paper and start the test print.
6. When the test print has completed, the paper is
automatically ejected.
CAUTION!
Allow at least 5 seconds between turning the printer
ON after turning it OFF. A shorter time interval
between turning ON/OFF operations may cause
printer power failure.
Do not turn the printer OFF while it is printing as this
may result in damage to the print head.
NOTE
If required, you can pause the test print by pressing the SEL
button and then resume the test print by again pressing the
SEL button.
NOTE
If you want to stop the test print for any reason, press the SEL
button followed by the LOAD/EJECT button to eject the paper.
Turn the printer Power Switch to OFF.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ML1120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ML1120 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info