492949
152
Zoom out
Zoom in
Previous page
1/180
Next page
Troubleshooting > 152
Dealing with Unsatisfactory Copying
As well as the suggestions provided in “Dealing with unsatisfactory printing” on page 151,
ensure that the scanner unit glass is clean at all times. Refer to “...the Document Glass” on
page 131.
Horizontal Lines and
spots appear
periodically.
When the interval is about 94
mm (4 in), the image drum
(the green tube) is damaged
or dirty.
Wipe it lightly with a soft cloth. Replace
the image drum cartridge when it is
damaged.
When the interval is about 42
mm (1.5 in), there may be
foreign particles in the image
drum cartridge.
Open/close the top cover, and print
again.
When the interval is about 87
mm (3.5 in), the fuser unit is
damaged.
Replace the fuser unit.
The image drum cartridge has
been exposed to light.
Replace the image drum cartridge if
the problem is not resolved.
White area of paper is
lightly stained.
Paper contains static. Use paper stored in proper
temperature and humidity conditions.
Too thick paper is used. Use thinner paper.
The toner is low. Open the top cover and tap the
cartridge a few times to evenly
distribute any remaining toner. If
symptoms persist, replace the toner
cartridge.
Periphery of the letters
is smudged.
The LED head is dirty. Wipe the LED head with a soft, lint-free
cloth.
Toner comes off when
it is rubbed.
The thickness and type of the
paper are incorrectly set.
Set the correct value of Media Type
and Media Weight in the Paper Setup
menu or set one value thicker for
Media Weight.
Recycled paper is used. Set one value thicker for Media Weight
in the Paper Setup menu.
Glossiness is not
uniform.
The thickness and type of the
paper are incorrectly set.
Set the correct value of Media Type
and Media Weight in the Paper Setup
menu or set one value lighter for Media
Weight.
SYMPTOMS POSSIBLE CAUSES STEPS TO TAKE
152


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MC860n MFP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MC860n MFP in the language / languages: English as an attachment in your email.

The manual is 7,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info