515923
61
Zoom out
Zoom in
Previous page
1/96
Next page
SENDING/RECEIVING A FAX
- 61 -
1
2
3
4
5
6
5
To display the preview screen, press
[PREVIEW].
6
Press [SEND].
The fax is sent or reserved.
Memo
Alternatively, you can press the [START] button on the
control panel.
In the memory transmission mode, the original is
scanned into memory. Once a connection has been
made, this equipment automatically starts sending the
scanned document. In the direct transmission mode,
the fax number is dialed immediately, and the scanned
document will be sent. (Transmission conditions can be
set in the transmission condition setting screen.)
If memory becomes full during scanning in the memory
transmission mode, that original will not be stored in
memory. When that happens, reduce the number of
originals you are sending, or try sending them in the
direct transmission mode.
You can check the status of the current sending. You
can also cancel the transmission (deletes the job).
P.73 "CHECKING AND CANCELING THE
COMMUNICATIONS"
Redial function
In the memory transmission mode, if the fax cannot be sent
due to a busy-line, the fax number is redialed automatically to
send the fax. By default, this equipment redials 3 times at 1-
minute intervals.
Batch transmission function
If there are multiple transmission jobs to the same recipient in
memory, you can send them at once using this function,
resulting in reduction of communication costs. However, if their
recipients are the same but their transmission conditions vary
or if users or departments are different when this equipment is
managed under the department management or user
management, this function is not applied to those reserved
jobs.
Sending the next original
If an original is placed on the original glass and its scanning is
completed, the confirmation screen for the next original is
displayed. If you want to continue scanning of the next original,
place it on the original glass, and then press the [START]
button on the control panel. Once all the originals are scanned,
press [JOB FINISH]. If you place an original on the RADF
(Reversing Automatic Document Feeder) and press the
[CONTINUE] button during scanning, the confirmation screen
for the next original can be displayed after the scanning is
completed.
If you leave the screen unattended for a period of the
auto clearance setting time (45 sec. by manufacturer
default), a copy of the scanned originals is sent.
To cancel the transmission in the memory transmission
mode, press [JOB CANCEL].
P.74 "Canceling the memory transmission"
To change the transmission conditions for each page,
press [OPTION].
P.66 "Changing the settings for each page"
Handling an original
Originals that can be sent
This equipment can send a fax of the following originals.
You can place 1-sided or 2-sided originals of the media types,
such as standard paper, recycled paper and paper having
holes (2, 3 or 4 holes) for filing, on the RADF (Reversing
Automatic Document Feeder). On the original glass, you can
place 1-sided originals of the above media types as well as
OHP film, tracing paper, booklets and three-dimensional
objects.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MC760 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MC760 in the language / languages: English as an attachment in your email.

The manual is 28,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MC760

Oki MC760 User Manual - German - 100 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info