492975
84
Zoom out
Zoom in
Previous page
1/133
Next page
Advanced network settings > 84
E
NCRYPTING
COMMUNICATION
BY
IPS
EC
You can encrypt the communication between your computer and the machine.
The communication is encrypted by IPSec. When IPSec is enabled, encryption is applied to
all the applications using the IP protocols.
You can specify up to 50 hosts by their IP addresses. When a host that is not registered
tries to access the machine, it is rejected. When you try to access a host that is not
registered, it is invalid.
You must have a pre-shared key in advance.
Configuring your machine
Be sure to configure your machine first from the web page to enable IPSec.
1. Access the machine’s web page and log in as the administrator.
2. Select Admin Setup.
3. Select Network > Security > IPSec.
4. Follow the on-screen instructions to specify the detailed settings.
5. Click Submit.
The network system reboots to enable the new settings.
Configuring your computer
Be sure to configure your machine in advance before configuring your computer.
1. Click Start and select Control Panel > Administrative Tools.
2. Double-click Local Security Policy.
3. On the Local Security Policy window, click IP Security Policies on Local
Computer.
4. From the Action menu, select Create IP Security Policy.
5. On the IP Security Policy Wizard, click Next.
NOTE
> When you enable IPSec, the communication to and from a host that is not
specified in this procedure is rejected.
> Be sure to memorize the values specified in this procedure. They are
necessary when you configure the IPSec setting on your computer.
NOTE
Either ESP or AH must be enabled in the configuration for “Phase2 Proposal”.
NOTE
If you fail to set up IPSec due to the mismatch of the specified parameter, you
cannot access the web page. In this case, disable IPSec from the control panel
of the machine or initialize the network settings.
NOTE
This procedure uses Windows 7 as an example. The procedures and menus
may differ depending on the OS you use.
84


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MC562 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MC562 in the language / languages: English as an attachment in your email.

The manual is 2,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MC562

Oki MC562 User Manual - German - 201 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info