492965
63
Zoom out
Zoom in
Previous page
1/143
Next page
Kopieren > 63
4. Drücken Sie die Pfeiltaste Links, um zum Startmenü zurückzukehren.
Margin Shift Right (Rand
setzen rechts)
0.00 in, 0.25 in, 0.50 in, 0.75 in, 1.00 in (0,00 Zoll, 0,25
Zoll, 0,50 Zoll, 0,75 Zoll, 1,00 Zoll) oder
0 mm, 6 mm, 13 mm, 19 mm, 25 mm (0 mm, 6 mm, 13 mm,
19 mm, 25 mm)
c
Margin Shift Bottom
(Rand setzen Unten)
0.00 in, 0.25 in, 0.50 in, 0.75 in, 1.00 in (0,00 Zoll, 0,25
Zoll, 0,50 Zoll, 0,75 Zoll, 1,00 Zoll) oder
0 mm, 6 mm, 13 mm, 19 mm, 25 mm (0 mm, 6 mm, 13 mm,
19 mm, 25 mm)
d
a. Die Option „N-up“ (N auf) kann nur auf einen anderen Wert als „1in1“ (1in1)
eingestellt werden, wenn „Paper Size“ (Papierformat) auf „A4“ (A4) oder „Letter“
(Letter) gesetzt ist und die Dokumente über den ADF gescannt werden. Die
Standardeinstellungen lauten wie folgt: „Collate“ (Sortieren) = „OFF“ (AUS), „Edge
erase“ (Verklein./Vergröß.) = „100%“, „Edge erase“ (Rand löschen) = „0 mm
(0.00in)“ (0 mm (0,00 Zoll)) und „Margin shift-Right/Bottom“ (Rand setzen rechts/
unten) = „0 mm (0.00in)“ (0 mm (0,00 Zoll)).
b. Die angezeigte Maßeinheit (mm oder Zoll) richtet sich nach der Einstellung „Admin
Setup“ (Admin-Setup) – „System Setup“ (System-Setup) – „Unit of Measure“
(Maßeinheit) im „Menu Mode“ (Menümodus). Wenn Sie für „Edge Erase“ (Rand
löschen) einen anderen Wert als „0 mm“ (0 mm) oder „0.00 in“ (0,00 Zoll)
festlegen, werden standardmäßig „Reduce/Enlarge“ (Verklein./Vergröß.) auf
„100%“, „N-up“ (N auf) auf „1in1“ (1in1) und „Margin Shift-Right/Bottom“ (Rand
setzen rechts/unten) auf „0 mm (0.00 in)“ (0 mm (0,00 Zoll)) gesetzt.
c. Die Bereiche des Druckbilds, die aufgrund dieser Einstellung nicht auf das Papier
passen, werden nicht gedruckt. Die angezeigte Maßeinheit (mm oder Zoll) richtet
sich nach der Einstellung „Admin Setup" (Admin-Setup) – „System Setup"
(System-Setup) – „Unit of Measure" (Maßeinheit) im „Menu Mode" (Menümodus).
Wenn Sie für „Margin Shift-Right“ (Rand setzen rechts) einen anderen Wert als „0
mm“ (0 mm) oder „0.00 in“ (0,00 Zoll) festlegen, wird „Edge Erase“ (Rand
löschen) standardmäßig auf „0mm (0.00in)“ (0 mm (0,00 Zoll)) gesetzt, und für
„Reduce/Enlarge“ (Verklein./Vergröß.) kann nur ein kleinerer Wert als „100%
ausgewählt werden.
d. Die Bereiche des Druckbilds, die aufgrund dieser Einstellung nicht auf das Papier
passen, werden gedruckt. Die angezeigte Maßeinheit (mm oder Zoll) richtet sich
nach der Einstellung „Admin Setup" (Admin-Setup) – „System Setup" (System-
Setup) – „Unit of Measure" (Maßeinheit) im „Menu Mode" (Menümodus). Wenn Sie
für „Margin Shift-Bottom“ (Rand setzen Unten) einen anderen Wert als „0 mm“ (0
mm) oder „0.00 in“ (0,00 Zoll) festlegen, wird „Edge Erase“ (Rand löschen)
standardmäßig auf „0mm (0.00in)“ (0 mm (0,00 Zoll)) gesetzt, und für „Reduce/
Enlarge“ (Verklein./Vergröß.) kann nur ein kleinerer Wert als „100%“ ausgewählt
werden.
MENÜPUNKT OPTIONEN
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MC360 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MC360 in the language / languages: German as an attachment in your email.

The manual is 10,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MC360

Oki MC360 User Manual - English - 133 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info