645026
18
Zoom out
Zoom in
Previous page
1/137
Next page
Getting started > 18
I
NSTALLING
DRIVERS
AND
UTILITIES
Your machine is supplied with the following drivers:
> TWAIN driver (only use when connecting to the MFP via USB) (Windows only)
> Printer driver: PCL5e, PCL 6, PostScript3 (MB470/MB480)
> Fax driver (MB470/MB480) (Windows only)
The installation instructions below refer to USB connection. For network connection details
refer to the Network Guide.
If you are running windows Server 2003 or Server 2008, you may need to follow these
steps to ensure WIA service starts when using the TWAIN driver and Actkey Utility.
1. Click Start > Administrative Tools > Services.
2. Double-click Services.
3. Double-click Windows Image Acquisition (WIA).
4. From the Startup type menu, select Automatic.
5. Under Service status, click Start.
6. Click OK.
W
INDOWS
- T
WAIN
AND
PRINTER
DRIVERS
The TWAIN driver is used for “Pull Scanning”, i.e. initiating a scan from your computer via
software. Compare this to “Push Scanning” where you start the scan by pressing a button
on the MFP's front panel. The TWAIN driver only works via USB connections. This means
it's not possible to control the scanner over the network from your computer.
There are two different ways of installing the TWAIN and printer drivers:
1. Plugging the printer in first and performing a “Plug and play” type of installation. In
this case you must install the TWAIN driver first.
2. Not plugging the printer in yet, but running the Oki driver installer program from the
DVD-ROM. This installs the TWAIN (scanner driver) and printer drivers. Once the
printer is switched on and plugged in, Windows completes the installation
automatically.
NOTE
You must be logged on as an administrator or a member of the Administrators
group in order to complete this procedure. If your computer is connected to a
network, network policy settings may also prevent you from completing this
procedure.
NOTE
> The Oki driver installer program is the recommended installation method.
> “Plug and play” installation only applies when connecting to your machine
via USB.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MB480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MB480 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MB480

Oki MB480 User Manual - German - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info