492988
161
Zoom out
Zoom in
Previous page
1/182
Next page
Changing Network Settings From the Web Page
- 161 -
Network Settings
8
You need to set the mail server to allow the machine to
send an e-mail. For details on the mail server setting, refer
to your network administrator.
If you use Internet Explorer 7, be sure to configure the
settings below before you send a test mail. In the browser,
select [Tools] > [Internet Options], then click [Custom
Level] on the [Security] tab. Then select [Enable] in
[Allow websites to prompt for information using
scripted windows].
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>[E-mail]>
[Send Settings].
4 Follow the on-screen instructions to
specify detailed settings.
5 Select [Set detail of the SMTP
Protocol].
6 If necessary, you can configure
[Security Settings], [Configure
attached information], and [Others].
7 Click [Send].
The network card reboots to enable the new
settings.
Regular Alert
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>[E-mail]>
[Alert Settings].
4 Enter an e-mail address to receive the
alerts.
5 Click [Setting] for the specified address.
[Copy] is useful when you want to apply the alert
conditions to another address..
6 Follow the on-screen instructions to
specify detailed settings.
7 Click [OK].
8 Click [View a summary of current
configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
9 Click [Send].
The network card reboots to enable the new
settings.
Memo
If there is no error specified, the alert e-mail is not sent.
Alert At Time of Error Occurrence
1 Perform steps 1 to 6 in "Regular Alert".
When an error or warning is selected to require
notification, a window will display to specify the
time between error occurrence and sending the
alert.
2 Specify the time to sending of an error
alert and then click [OK].
If you specify a longer time, you are only notified
of persisting errors.
3 Click [OK].
4 Click [View a summary of current
configuration] to check the current
settings, and then click [X] to close the
window.
You can also check the current settings of up to
two addresses on the main window. Select the
desired addresses to check from the list box.
5 Click [Send].
The network card reboots to enable the new
settings.
Using SNMPv3
When you use the SNMP manager that supports
SNMPv3, the management of the machine is
encrypted by SNMP.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>[SNMP]>
[Setting].
4 Follow the on-screen instructions to
specify detailed settings.
5 Click [Send].
The network card reboots to enable the new
settings.
Memo
Your machine has an SNMP agent. You can confirm and
change the machine settings by a commercially available
SNMP agent. For the MIB of the machine, refer to the
software DVD-ROM and check the "README" file in the
[Misc] > [MIB] folder.
161


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MB471 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MB471 in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MB471

Oki MB471 User Manual - English - 203 pages

Oki MB471 User Manual - German - 229 pages

Oki MB471 User Manual - German - 210 pages

Oki MB471 User Manual - Dutch - 222 pages

Oki MB471 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info