645024
58
Zoom out
Zoom in
Previous page
1/137
Next page
Access control > 58
A
CCESS
CONTROL
The operation and functionality of this machine can be limited to authorised personnel only
by the simple introduction of a 4-9 digit PIN (Personal Identification Number). This is known
as Access Control. The greater the number of digits in the PIN - the more secure it is.
Your MFP supports the following PIN types:
> Administrator PIN; This is the PIN for the system administrator(s).
If a PIN is registered as an administrator, the Admin password entry screen is
displayed, and when an Admin password is entered, it will be authenticated as an
administrator.
> User PIN; This is PIN for general users.
If a PIN is registered as a general user, the function selection screen is displayed, also
after PIN entry, the function selection screen is displayed.
After using the machine, you will be expected to log out. Leaving the machine in access
control mode will render the machine not usable by unauthorised users.
E
NABLING
A
CCESS
CONTROL
Access Control Enable/Disable is switched in Menu > Admin Setup > System Setup >
Access Control.
If your administrator has enabled access control on your machine, it will automatically start
up in access control mode. You will not be able to use it until you have provided valid login
information.
With Access Control set to enable, the display reverts to the System Setup screen
immediately following the setting change. If one of the functions such as Print, Fax Send
or PC Scan is running, the display will only revert to the System Setup screen when the
task has been completed.
L
OGGING
IN
1. If the Enter PIN screen is displayed, use the keypad to enter your PIN.
2. Press Enter (or the Start button) to confirm.
3. At the Enter Password screen, use the on-screen keypad to enter your password.
4. Use the Up arrow key to highlight Done and press Enter to confirm.
L
OGGING
OUT
When you have finished using the machine, make sure you log out:
1. Using the Down arrow key, highlight Logout and then press Enter.
The Confirm Logout screen is displayed.
NOTE
A valid PIN consists of 4 to 9 digits.
Numbers entered are not displayed on-screen, they are replaced by “*”.
If the PIN entered in invalid, “Incorrect Password” is dispalyed for 3 seconds
and the display reverts to the Enter the PIN screen.
NOTE
With Access Control enabled, Logout options are displayed in the Menu on the
Mode Selection screen.
58


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MB460 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MB460 in the language / languages: English as an attachment in your email.

The manual is 7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MB460

Oki MB460 User Manual - German - 150 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info