492985
42
Zoom out
Zoom in
Previous page
1/203
Next page
Basic Settings for Faxing (for MB451, MB451w, MB471, MB471w, MB491, MB491+, MB491+LP, ES4191 MFP, MPS4200mb, MPS4700mb only)
-42-
- Picking up the telephone receiver when sending or
receiving a fax may interrupt pictures or cause
communication error to occur.
- The fax transfer function is not able to work from the
external telephone.
Memo
In the case of direct interconnection, separate construction is
needed. Please contact the telephone company that you use.
Other cases
Turn off the machine when you connect the telephone line
with the machine.
Connecting to the ADSL Environment
Plug the [Telephone cable] connected to the
ADSL modem into the [LINE connection] of
your machine.
Remove the telephone connector cover.
Plug the external telephone's cable into the [TEL
connection] of your machine.
Memo
Check the dial tone detection if it is unable to dial and refer
to "Admin Setup - User install" P.103 Advanced.
If you cannot send or receive faxes well, set [
Super G3
] to
off. Refer to "Setting for Super G3" P. 45.
Connecting to IP Telephone
Plug the [Telephone cable] connected to the IP
telephone into the [LINE connection] of your
machine.
Remove the telephone connector cover.
Plug the external telephone's cable into the [TEL
connection] of your machine.
Memo
Check the dial tone detection if it is unable to dial and refer
to "Admin Setup - User install" P.103 Advanced.
If you cannot send or receive faxes well, set [
Super G3
] to
off. Refer to "Setting for Super G3" P. 45.
Connecting CS Tuner or Digital
Television
Plug the [Telephone cable] connected to the
[Public Line (Analog)] into the [LINE
connection] of your machine.
Remove the telephone connector cover.
Plug the telephone cable connected to the CS tuner
or digital television into the [TEL connection] of
your machine.
Public Line (Analog) Public Line (Analog) first floor second floor
TEL connection
LINE connection
Telephone cable
Splitter
ADSL modem
Public Line
(Analog)
LINE connection
TEL connection
Telephone cable
Optical IP telephone
Corresponding telephone
*Insert into the
telephone cable jack.
Optical Network Unit (ONU)
Optical cable
LAN
cable
LINE connection
TEL connection
CS tuner or digital
television
Telephone cable
Public Line
(Analog)
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MB441 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MB441 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MB441

Oki MB441 User Manual - English - 182 pages

Oki MB441 User Manual - German - 210 pages

Oki MB441 User Manual - German - 229 pages

Oki MB441 User Manual - Dutch - 222 pages

Oki MB441 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info