492984
59
Zoom out
Zoom in
Previous page
1/100
Next page
MB290
- 54 -
10 - Message service
Message service
Your multifunction machine lets you send and receive
emails via your local network.
To do so, you must connect your machine to a local
network. You must also configure the message service
settings.
Information required to set up
message service
Your network administrator must provide you the
following elements:
message service identifier
message service password
email address
servers’ identifiers (SMTP, POP, DNS1 and DNS2)
Configuring initialisation parameters
91 - E-MAIL / SUPPLIER
1 Select the L
OCAL
NETWORK
from the list and
confirm with OK.
921 - E-MAIL / INIT ETHERNET / MESS. SERV
1 Enter Email Identifier, press OK.
2 Enter Email Password, press OK.
3 Enter E-mail Address, press OK.
Access to servers parameters
922 - E-MAIL / INIT ETHERNET / SERVERS
1 Enter Smtp, press OK.
2 Enter Pop3, press OK.
3 Enter Dns 1 (primary), press OK.
4 Enter Dns 2 (secondary), press OK.
Access to SMTP authentication parameters
923- E-MAIL / INIT ETHERNET / SMTP AUTHENT.
1 In the ACTIVATION menu, select ON to activate
SMTP authentication then validate with OK key.
2 In the SETTINGS menu, select ID.MESS SERV. to
keep the same identification parameters as in the
messaging service or AUTHENT. SPEC. to define
other identification parameters, then validate by
pressing OK key.
3 When you select AUTHENT. SPEC., carry out the
two following operations:
9233- E-MAIL / INIT ETHERNET / SMTP AUTHENT. /
IDENTIFIER
1 Enter the IDENTIFIER then validate with OK key.
9234- E-MAIL / INIT ETHERNET / SMTP AUTHENT. /
PASSWORD
1 Enter the PASSWORD then validate with OK key.
Sending an E-mail text
You can send a typed message to an E-mail mailbox.
95 - E-MAIL / SEND EMAIL
1 Enter the addressee’s E-mail address or choose
your dialling mode and confirm with OK.
2 Enter the address of who you want to receive a
copy of the document (CC:), and press OK to
confirm.
3 Enter the object for mail (80 characters max.) and
press OK.
4 Enter the text with the alphabetical keypad (100
lines of 80 characters) and confirm with OK.
To go to the next line, use key .
5 Press OK to confirm.
The mail is stored and will be sent at the next connection
to the local network.
Scan to Mail
The Scan to Mail function enables you to analyse a
document and send it as an attachment (TIFF, JPEG or
PDF) to an E-mail address.
To send a file as an attachment to an E-mail address:
1 Place the document to be copied in the automatic
document feeder, face printed on the top.
or
Place the document to be copied face down on the
glass, respecting the indications around the glass.
2 Press key . A choice screen is displayed.
3 Select SCAN-TO-MAIL with keys or then
press OK key.
4 Enter the addressee’s E-mail address or choose
your dialling mode and confirm with OK.
5 Enter the address of who you want to receive a
copy of the document (CC:), and press OK to
confirm.
6 Enter the object for mail (80 characters max.) and
press OK.
7 Enter the text with the alphabetical keypad (100
lines of 80 characters) and confirm with OK.
To go to the next line, use key .
8 Press OK to confirm.
9 Select B&W SCAN to send a black and white
document or COLOUR SCAN to send a colour
document, and validate with OK key.
Important
Choosing No Access disables
access to local network functions.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki MB290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki MB290 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MB290

Oki MB290 User Manual - Dutch - 106 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info