Manual Oki MB290 (page 42 of 100) (English)

492984

Zoom out

Zoom in

1/100

MB290

- 37 -

6 - Parameters/Setup

6 - EPT mode

For some long distance calls

(satellite), the on-line echo may

disturb the call.

7 - COM. display

Choice between transmission

speed displayed or number of the

page in progress.

8 - Eco energy

Choosing the printer standby

delay: the printer will switch to

standby after a delay (in minutes)

of NON-operation or during the

period of time of your choice.

Note: you can also access this

parameter by pressing the

key from the idle screen.

10 - RX header

If this parameter is on, all

documents received by your fax

will include the subscriber’s header

with his/her name, number (if

available) fax print date and the

page number.

11 - RX speed

Transmission speed for incoming

documents.

For a quality telephone line

(compatible, no echo),

communications occur at

maximum speed.

However, it may be necessary to

restrict the transmission speed for

some calls.

12 - Rings

Number of rings to automatically

start your machine.

13 - Discard size

The Discard Size parameter only

defines the printing of received

faxes. The number of lines of a

document can be too high for the

printing paper format. This

parameter defines the threshold

beyond which the extra lines are

printed on a second page. Below

this threshold, extras lines are

deleted.

If you choose ON, the threshold is

set on 3 centimeters.

If you choose OFF, the threshold is

set on 1 centimeter.

20 - E.C.M.

This parameter helps correct the

calls made on disturbed telephone

lines. It is used when the lines are

weak or too noisy. Transmission

times may be longer.

Parameter Signification

25 - TEL Impedance

This parameter lets you choose

between a complex impedance

and a 600 Ohm impedance,

depending on the telephone

network your terminal is connected

to.

73 - Improve rep @

This parameter lets you

automatically register the Internet

address of your subscribers fax

during a call (if available).

74 - Erase mailbox

When the fax machine receives an

e-mail with an attachment and

cannot open it, it erases the

message from the ISP MBX, prints

and transmits with a notice of

uncomprehension to the message

sender.

At E-mail reception, the fax does

not destroy the MBX message, it

prints a notice of uncomprehension

asking you to recuperate this

message with your computer

equipment.

This parameter is useful only if you

have PC equipment. The memory

capacity is limited, you need to

empty your MBX or else new

messages may not be received.

75 - Text Attchmt.

Editing ON / OFF and printing the

received Internet documents.

76 - Attchmt. form

Default format of document sent

on the Internet:

PDF : monochrome or colour

IMAGE : monochrome (TIFF) or

colour (JPEG)

77 - LAN speed

To define the communication

speed of the peripheral units in

relation to the implemented Local

Area Network (LAN).

80 - Toner save

Makes printing lighter to save toner

cartridge ink.

81 - Font number

Starts the printing of the log list.

This parameter lets you set the

default PCL font. The possible

values are included between 5 and

128 included. The default value is

0 (Courier).

Parameter Signification

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oki MB290 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki MB290

Oki MB290 User Manual - Dutch - 106 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oki MB290 Manual

Product: