Manual Oki LD670 (page 34 of 1345) (English, German, French, Italian, Portuguese, Spanish)

665642

Zoom out

Zoom in

1/1345

5-2. Setting the Paper Width

Separator A is set to the position for a paper width of 70 mm at the time of

shipment from the factory.

- By adjusting the position of separator A, you can use paper with a width

within a range of 70 to 25.4 mm. (See "Section 5-2-1. Attaching separator A.")

- To use paper with a width of 80 mm, remove separator A.

(See "Section 5-2-2. Removing separators A and B.")

- To use paper with a width of 83 mm, remove separators A and B.

(See "Section 5-2-2. Removing separators A and B.")

Note : When replacing the separator, set a paper width appropriate to the

print area, referring to "Special Modes."

(See Examples (7) in Section 10-2, "Setting Up the Printer.")

Note : If the printer is using narrow paper (e.g., width of 70 mm), do not replace

the paper with wide paper (e.g., width of 80 mm). In printing with

narrow paper, part of the thermal head (the part where there is no

paper) comes in direct contact with the platen roller. The resulting wear

may lead to a deterioration in print quality. Similarly, if the paper width

is changed such that the cutter blade cuts at a location that has no paper,

the resulting wear on the blade may lead to improper cuts.

Note : Do not touch the thermal head except during cleaning. Doing so may

result in damage from static electricity.

Thermal head

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oki LD670 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 14,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oki LD670 Manual

Product: