Manual Oki LD670 (page 21 of 1345) (English, German, French, Italian, Portuguese, Spanish)

665642

Zoom out

Zoom in

1/1345

3-4-2. Conditions for using black mark paper

When using receipt paper or full-sheet label paper with black marks,

confirm that the following conditions are satisfied. The reflection factors at

locations A and B on the paper must be the combination of values specified

in the table below.

Reflection factor

A: Black mark area 8%

B: Margins above or below black marks 75%

Note: The reflectivity values were measured using a Macbeth PCM II

density meter (Filter C).

0 to 1 mm

10 to 12 mm

5.0 to 5.5 mm

Print area

(seen from the

back side of

paper)

Back side of paper

(back of the coloring side of paper)

Paper feed

direction

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Oki LD670 in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 14,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Oki LD670 Manual

Product: