665240
59
Zoom out
Zoom in
Previous page
1/141
Next page
- 59 -
Connecting the PC
AppendixPrinting
3
Setting Up
2
Before use
1
Basic Device Operations
4
Index
Installer Printer Drivers
(Windows)
Network Connections
To connect the Windows PC and device to the
network, rst set the device IP address. Next,
install the printer drivers on the PC.
If there are no DHCP or BOOTP servers on the
network, it is necessary to set the IP address on
the PC and device manually.
Further, it is also necessary to set the IP address
in the PC and device manually if instructed to
set a specic IP address determined by the in-
house network administrator, provider, or router
manufacturer.
Setup Flow
Turning ON the device power supply
Setting the IP address in the device
Turning ON the PC power supply
Setting the IP address, etc., in the PC
Installing the printer drivers
Note
If the IP address is incorrect, the network may go
down, or internet connections be disabled. Check the IP
addresses that can be set in the device with your in-house
network administrator or internet service provider.
The server on the network (DHCP, etc.) depends on the
network environment in use. Check with your in-house
network administrator, internet service provider, or router
manufacturer.
Setup requires computer administrator privileges.
In "Setting Up", the operating procedure described is for
Windows 7 unless otherwise specied. The screens and
operating procedure may differ depending on the OS.
Setting the IP Address in the
Device Using the Control Panel
Memo
If conguring using a small scale network that connects
the device to a single PC, set the following IP address
(conforming to RFC1918).
PC
-
IP address: Any from 192.168.0.1 to 254
-
Subnet mask: 255.255.255.0
-
Default gateway: Not used
-
DNS server: Not used
Device
-
IP address setup: Manual from 192.168.0.1 to 254
(Select a different value fom the PC.)
-
Subnet mask: 255.255.255.0
-
Default gateway: 0.0.0.0
-
Network size: Small scale
This section explains the following settings as an
example.
IP address: 192.168.0.3 (PC)
192.168.0.2 (Device)
Subnet mask: 255.255.255.0
Gateway address: 192.168.0.1
1
Press either the scroll button or
on the control panel to display the
"Functions" screen.
2
Press the scroll button several times
to select [Admin Setup], and then press
the [OK] button.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES9431 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES9431 in the language / languages: English as an attachment in your email.

The manual is 26,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES9431

Oki ES9431 Additional guide - English - 334 pages

Oki ES9431 Additional guide - German - 336 pages

Oki ES9431 User Manual - German - 141 pages

Oki ES9431 Additional guide - Dutch - 105 pages

Oki ES9431 User Manual - Dutch - 141 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info