665212
33
Zoom out
Zoom in
Previous page
1/139
Next page
- 33 -
Connecting to a Computer
1
1. Setup
1 Conrm the position of the easy setup
button and when to press the button
by referring to the user manual of the
wireless LAN access point.
2 Conrm that the wireless LAN access
point has been activated and is
functioning normally.
3 Turn on the printer.
4 Press the scroll button several times
to select [Wireless(Infrastructure)
Setting], and then press the <ENTER>
button.
5 Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
6 Press the scroll button several times
to select [Automatic setup (WPS)],
and then press the <ENTER> button.
7 Select [WPS-PBC], and then press the
<ENTER> button.
8 Select [Yes], and then press the
<ENTER> button.
9 The Printer starts searching for wireless
LAN access points. During 2 minutes,
press the easy setup button for the
wireless LAN access point for a few
seconds.
Once Connection successful is displayed,
it indicates that the wireless LAN setup has
completed.
If Connection failed is displayed, repeat the
procedure from step 4.
If an antenna appears on the upper right corner
of the operator panel, it indicates that the
connection is successful.
Connecting by Selecting a Wireless
LAN Access Point from the Control
Panel
If the wireless LAN access point does not support
WPS, you can connect by selecting the wireless
LAN access point you want to use from those the
machine has detected. To do this, an encryption
key is required.
1 Conrm and write down the SSID and
encryption key by referring to the user
manual of the wireless LAN access point.
Memo
The SSID is also called the network name, ESSID, or
ESS-ID.
The encryption key is also called the network key,
security key, password, or pre-shared key.
2 Conrm that the wireless LAN access
point has been activated and is
functioning normally.
3 Turn on the printer.
4 Press the scroll button several times
to select [Wireless(Infrastructure)
Setting], and then press the <ENTER>
button.
5 Enter the administrator password, and
press the <ENTER> button.
The factory default password is “999999”.
6 Press the scroll button several times to
select [Wireless Network Selection],
and then press the <ENTER> button.
7 The printer starts searching for wireless
LAN access points. Please wait.
8 A list of available wireless LAN access
point SSIDs are displayed. Press or ,
select a wireless LAN access point, and
press the <ENTER> button.
Note
If only [Manual Setup] is displayed or the desired
wireless LAN network SSID is not displayed, follow
the procedure in “Connecting by Manual Setup from
Control Panel” to do the settings.
9 A screen opens in which to input the
encryption key appropriate to the
encryption procedure for the selected
wireless LAN access point; input the
encryption key.
Memo
The encryption key differs depending on the wireless
LAN access point and security.
If [WPA Pre-shared Key] is displayed
Item Explanation
Encryption
method
WPA/WPA2-PSK
Encryption key Enter the pre-shared key.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES8443 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES8443 in the language / languages: English as an attachment in your email.

The manual is 45,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES8443

Oki ES8443 User Manual - German - 151 pages

Oki ES8443 User Manual - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info