645019
63
Zoom out
Zoom in
Previous page
1/96
Next page
SENDING/RECEIVING A FAX
- 63 -
1
2
3
4
5
6
The pre-entered sender information shows what is
registered in the Terminal ID.
Advanced Guide
3
Lower the Original Cover or RADF slowly.
Placing the original(s) on the RADF
This section describes how to set the original(s) on the RADF
(Reversing Automatic Document Feeder). When the originals
are placed on the RADF, the uppermost page is the first to be
scanned and sent.
When scanning the duplex original with the RADF, do
not put your hand on the RADF. Paper may damage the
hand.
When scanning the duplex original with the RADF, do
not put an object on the RADF. This could cause a paper
misfeed.
1
After aligning the originals, place them with
their face up and slide the guides to rest
against the edges of the originals.
Regardless of size, documents can be set to 100
sheets (80g/m
2
(20 lb.)) or size 10mm (0.39inch) max.
2-sided originals can be set and sent.
Advanced Guide
When an original size is placed in the direction shown
in the upper figure, transmission to a recipient is
carried out so that the pre-entered sender information
is printed in position A in the figure.
When an original size is placed in the direction shown
in the lower figure, transmission to a recipient is carried
out so that the pre-entered sender information is
printed in position B in the figure.
The pre-entered sender information shows what is
registered in the Terminal ID.
Advanced Guide
Sending documents of different sizes
The automatic 2-sided document feeder can be used to set
documents of different sizes together. The following
combinations of document sizes are possible.
Other than North America: A4, Folio
North America: Letter, Legal, Legal 13
Memo
To send different width originals, you need to enable
“MIXED ORIGINAL SIZES” as a transmission condition.
P.64 "Setting the transmission conditions"
Precautions for using the RADF
Do not use the following originals as they may misfeed or
become damaged:
The following originals should be handled carefully:
A
B
(1) Badly wrinkled or folded originals. In
particular, originals whose leading edge
are curled may fail to be fed.
(4) Clipped or stapled originals
(2) Originals with carbon paper (5) Originals with holes or torn originals
(3) Taped, pasted or clipped (cut out)
originals
(6) Damp originals (7) OHP film originals
(1) Folded or curled originals should be smoothed out
before being used.
(2) Originals sticking to each other, or originals that are
surface-treated may fail to separate properly.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES7480 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES7480 in the language / languages: English as an attachment in your email.

The manual is 11,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES7480

Oki ES7480 User Manual - English - 357 pages

Oki ES7480 User Manual - German - 100 pages

Oki ES7480 User Manual - German - 363 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info