645018
71
Zoom out
Zoom in
Previous page
1/96
Next page
SENDING/RECEIVING A FAX
- 71 -
1
2
3
4
5
6
Receiving a Fax
Reception mode
This section describes how to receive a fax. Refer to the
appropriate section for your current reception mode. The
reception mode can be set on the ADMIN menu. For details of
the current setting, ask your administrator. Besides the
receiving methods described in this page, there are various
useful ways to receive a fax. These procedures are described
in the following Guide.
Advanced Guide
AUTO reception
Faxes are automatically received during an incoming call.
Users do not have to do anything when receiving a fax.
MANUAL reception
Faxes are manually received by using an external telephone
when you have an incoming call.
1
Pick up the handset of the external
telephone when you have an incoming call.
If the incoming call is a telephone call, you can start
talking.
2
If you hear a tone (fax signal) through the
handset of the external telephone, press
the [FAX] button on the control panel.
P.60 "Basic procedures"
3
Press the [ADVANCED] tab, and then press
[MANUAL RECEIVE].
4
When a message appears indicating that
you can send a fax, press the [START]
button on the control panel and replace the
handset of the external telephone.
TEL / FAX auto switching
Any incoming call is determined and answered as a voice call
or a fax call automatically.
Incoming fax
The incoming call is answered as a fax call automatically.
When an incoming fax arrives, the user does not need to do
anything.
Incoming call
When the ring-back tone rings, the user lifts up the handset or
the receiver of external telephone to speak. During the mode of
remote reception via an external telephone, you can switch to
fax reception.
Note
The ring-back tone is a pseudo tone signaling that the line is
connected and so the opposite party will be charged for this
call while it is ringing.
Even if the opposite party hangs up while the ring-back tone
is ringing, the ring-back tone may continue to sound for
about another 30 seconds.
Memory reception
In the following conditions, faxes cannot be printed. If this
happens, received fax data are stored in the memory, and
printing is resumed as soon as this equipment is ready. As the
memory reception function is always enabled, you do not need
to make any setting.
During copying or printing
During printing of received copy of the originals
During printing of lists and reports
When paper has run out
When a paper misfeed occurs
When toner has run out
Originals and paper
Acceptable size of paper
A4, A5, B5, Folio, Letter, Legal, Legal 13 and Statement sized
paper are available.
The printing range of each size of paper is as follows: As
shown in the figures below, if an original document contains
any information in the shaded area, it is not printed on the
paper.
Memo
Set the paper in the trays. The multi-purpose tray is not
available.
Regardless of whether or not the Finisher is installed, paper
exits on the receiving tray.
Trays can be set for fax use only.
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
5 mm
(0.2 inch)
71


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES7470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES7470 in the language / languages: English as an attachment in your email.

The manual is 11,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES7470

Oki ES7470 User Manual - English - 357 pages

Oki ES7470 User Manual - German - 100 pages

Oki ES7470 User Manual - German - 363 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info