Installing upgrades > 73
C
ONNECTING
IN
W
IRELESS
LAN(I
NFRASTRUCTURE
M
ODE
)
Precations When Using Wireless LAN
Carefully read the following precautions before using the machine in a wireless LAN
environment.
• In a wireless LAN environment, the machine enters sleep mode, but does not enter deep
sleep mode.
• Do not place any devices (especially microwave ovens or digital cordless telephones) that
emit weak electromagnetic waves near the machine.
• Install the machine near a wireless LAN access point or wireless device with no obstacles
between them (the distance should be within 30m).
• Wireless connections may be difficult if there is any metal, aluminum framed windows, or
reinforced concrete walls between the machine and the wireless LAN access point.
• Wireless LAN connections may have slower transmission speeds, depending on the
environment, than wired LAN or USB connections. We recommend using a wired LAN or
a USB connection to print large amounts of data, such as photographs.
To choose a valid default gateway.
1. Press up or down on the operator panel to display Admin Setup.
2. Press the Enter button.
3. Enter the Admin password, and then press the Enter button.
(The default password is 999999.)
4. Press up or down on the operator panel to display Network Setup, and then press
the Enter button.
5. Press up or down on the operator panel to display Enabling Default Gateway,
and then press the Enter button.
6. Press down on the operator panel to display Wireless(Infrastructure), and then
press the Enter button.
Connecting Using WPS
If the wireless LAN access point supports WPS, the connection to the wireless LAN can be
made easily by using the easy setup button (WPS button).
Follow the procedure below for the setup.
1. Confirm the position of the easy setup button and when to press the button by
referring to the user manual of the wireless LAN access point.
2. Confirm that the wireless LAN access point has been activated and is functioning
normally.
3. Turn on the printer.
4. Press up or down on the operator panel to display Wireless(Infrastructure)
Setting, and then press the Enter button.
5. Enter the Admin password, and then press the Enter button.
6. Press up on the operator panel to select Enable, and then press the Enter button.
7. Press up or down on the operator panel to display Automatic setup (WPS), and
then press the Enter button.
8. Select WPS-PBC, and then press the Enter button.
