492991
153
Zoom out
Zoom in
Previous page
1/203
Next page
Other Issues
-153-
Troubleshooting
7
Other Issues
This section explains the issues you may encounter while operating your machine and how to solve them.
Unable to Print from a Computer
Memo
If the following information does not solve the trouble, contact your dealer.
For troubles caused by an application, contact the manufacturer of the application.
General Causes
Common to Windows and Mac OS X
For Windows
Cause Remedy Reference
The machine is in sleep mode. Press the <POWER SAVE> key on the operator panel to
enter the standby mode.
If the sleep mode is not used, disable it from the <SET-
TING> key > [Admin Setup] > [User Install] >
[Power Save] > [Sleep].
P. 2 0
The machine is turned off. Hold down the power switch for about a second to turn
on the power.
P. 2 0
An Ethernet or USB cable is unplugged. Check that the cable is plugged into the machine and
computer properly.
-
Something is wrong with a cable. Replace it with a new cable. -
The machine is off line. Press the <PRINT> key on the operator panel, and then
select [On-Line].
-
An error message is displayed on the
display screen of the operator panel.
"Error Messages Displayed on the Screen" on P. 141 or
press the <?HELP> key on the operator panel.
P. 1 4 1
The interface setting is disabled. Check the setting of the interface being used from the
operator panel.
Advanced
Something is wrong with the print
function.
Check if you can perform configuration print. P. 7 8
The LED indicator in the power
switch is blinking at high speed per
about 0.3 second.
The machine may be malfunctioning. Unplug the AC
cord immediately. Contact your dealer
.
-
Cause Remedy Reference
The machine is not set as the default printer.
Set the machine as the default printer. -
The output port for the printer driver is
incorrect.
Select the output port to which the Ethernet or USB
cable is connected.
-
A print job from another interface is in
progress.
Wait until the print job is done. -
[Received invalid data] is displayed on
the display screen and printing cannot be
done.
Press the <SETTING> key and select [Admin Setup] >
[Print Setup] > [Print menu] > [Printer Adjust] >
[Wait Timeout], and then select a longer time. The
default setting is 40 seconds.
-
A print job is automatically canceled. If using Print Job Control, the print job is not authorized
to print, or the Job Accounting log buffer may be full.
Advanced
153


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4191 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4191

Oki ES4191 User Manual - English - 182 pages

Oki ES4191 User Manual - German - 229 pages

Oki ES4191 User Manual - German - 210 pages

Oki ES4191 User Manual - Dutch - 222 pages

Oki ES4191 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info