492991
113
Zoom out
Zoom in
Previous page
1/203
Next page
Scanning Methods
-113-
Scanning
4
7 Press the to select [Select An
Application] and then press .
8 Press the to select where to send the
scanned document and then press .
9 Press or .
Memo
If you select [Application], the specified application starts
and the scanned image is displayed on the application.
If you select [Folder], the scanned image is saved in the
specified folder.
If you select [
PC-FAX
], the application for fax transmission
starts. After sending the scanned image, send your fax with
the fax transmission software on your computer.
WSD Scan connection
1 Press the <SCAN> key on the Operation
Panel.
2 Place the original on the automatic
document feeder or on the scanner glass.
3 Press the to select [Local PC] and
then press .
4 Check that the [Select A Connecting
PC] is selected, and press .
5 Press the to select [From WSD Scan]
and then press .
6 Press the to select the destination PC
and then press .
7 Press the to select [Duplex Scan]
and then press .
8 Press the or to select [ON] or
[OFF] and then press .
9 Press or .
Memo
To start the dual-sided scan, turn its setting On and place
the original on the automatic document feeder. If you turn
the dual-sided scan On but place the document on the
scanner glass, you cannot scan the dual sides of document.
When using the scanner application on PC, it will be
scanned by the scanner type of scan profile setup on PC,
regardless of where the document is set or the setting of
[
Duplex Scan
].
Scan to Remote PC
This will launch the Scanner driver from a utility
installed on the PC (ActKey, PaperPort, Image,
Adobe Photoshop CS3, etc.) and will begin scanning.
Connect the machine to a computer via USB or a
network.
TWAIN (USB connection and Network
connection) and WSD Scan are supported.
There are 3 Modes of Operation:
Simple Scan Mode, Manual Scan Mode, and
Secure Scan Mode.
In Simple Scan Mode, the scanning can be
started from all computers via USB, Network and
WSD Scan connection, without special operation
on the operator panel.
In Manual Scan Mode, the scanning can be
started from all computers via USB, Network and
WSD Scan connection.
In Secure Scan Mode, scanning can only be
performed by a machine among the already
registered computers in the network via USB,
Network and WSD Scan connection.
Only one computer can be connected at the
same time.
Memo
For the following procedure, ActKey will be used as an
example for Windows, and Adobe Photoshop CS3 for Mac
OS X. The items in this manual may differ depending on
the application you are using.
Note
Connect the machine to a computer via USB or a network.
Install an application (ActKey, PaperPort, etc.) and a
scanner driver before starting a scan job. This installation
is NOT required for WSD Scan connection.
If you connect the machine to network, follow these
instructions.
-Set [TCP/IP] setting to [Enable].
- Conform the IP version of the machine to that of your
computer.
- Set up the DNS server.
- Enable the network TWAIN setting.
When in Secure Scan Mode, the administrator needs to
register the computer information for carrying out security
scans from the control panel or the web site beforehand.
For Mac OS X, when carrying out a network scan for the
first time, you need to set the connection target when
using a driver. When you use the driver for the first time,
the connection target selection tool will launch.
You do not need to set the connection target after the first
time.
To operate the MFP in the WSD Scan connection, set the
followings.
-Set the [TCP/IP] setting of the MFP to [Enable].
- Match the IP version between the MFP and the PC.
- Enable the WSD Scan.
- Install the MFP on the PC.
Reference
For details on how to install a scanner driver, refer to
"Installing Scanner Drivers (TWAIN/WIA/ICA Driver)" P. 104.
OK
OK
MONO
COLO
R
OK
OK
OK
OK
OK
OK
MONO
COLO
R
113


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4191 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4191

Oki ES4191 User Manual - English - 182 pages

Oki ES4191 User Manual - German - 229 pages

Oki ES4191 User Manual - German - 210 pages

Oki ES4191 User Manual - Dutch - 222 pages

Oki ES4191 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info