492991
92
Zoom out
Zoom in
Previous page
1/203
Next page
Machine Behavior in Fax Reception
-92-
Machine Behavior in Fax Reception
This section explains how your machine behaves when receiving and printing faxes.
Reception Behavior
The machine behavior differs depending on the
specified reception mode.
Your machine is set by factory default to [Fax
Ready Mode] so that it automatically receives
faxes. If you have changed the fax reception
mode, see the following descriptions for the
machine behavior.
When the machine is receiving faxes, the <DATA
IN MEMORY> indicator is lit. If <STATUS> is
pressed and is pressed twice, the information
is displayed on the display screen. Even if the
reception is finished, the indicator remains lit
while the data is stored in memory.
Memo
If the memory overflows while the machine is receiving
data, the reception is cancelled. If this happens, ask the
sender to resend the fax.
When Receiving Calls and Faxes
(Tel/Fax Ready Mode)
When the machine is set to [Tel/Fax Ready
Mode], you can receive calls and faxes. You
must connect an external telephone in advance
to receive calls.
Reference
For details on how to connect an external telephone, refer
to "Connecting a Telephone Line" P. 41.
Receiving Faxes
The machine automatically starts fax reception.
Receiving Calls
The telephone starts ringing when it receives calls.
1
Pick up the handset when the machine rings.
You can talk with someone on it.
2
If you want to receive a fax, press .
If you keep picking up the handset, you can talk to
the sender after receiving faxes.
Memo
If you often receive calls, it is recommended that you
activate [Tel Priority Mode]. For more detailed
information on [Tel Priority Mode], please refer to User's
Manual Advanced.
If connecting to a telephone unit that is far away, you can
receive faxes by dialing the remote switchover number.
Please dial the remote switchover number within three
seconds. For more details on the remote switch over
number, please refer to User's Manual Advanced.
When Connecting An Answering
Machine (Ans/Fax Ready Mode)
When the machine is set to [Ans/Fax Ready
Mode], you can use an answering machine and
receive faxes automatically. Be sure to connect
an external answering machine in advance.
Memo
Depending on the answering machine and the sender
machine, [Ans/Fax Ready Mode] may not operate
correctly.
Reference
For details on how to connect an answering machine, refer
to "Connecting a Telephone Line" P. 41.
Receiving Faxes
The answering machine rings, the reply message
starts, and the machine automatically starts fax
reception.
Receiving Calls
The answering machine rings, the reply message
starts, and then it starts recording a message.
When Often Using Telephone (Tel
Ready Mode)
[
Tel Ready Mode
] is recommended if you often use
the external telephone connected to the machine.
Receiving Calls
The telephone starts ringing when it receives
calls.
Receiving Faxes
The telephone starts ringing when it receives a
signal.
1
Pick up the handset when the machine rings.
2 Press .
To restart a conversation after receiving a fax, just
pick up the receiver. After the fax has been
received, you can talk on the phone.
MONO
MONO
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4191 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4191

Oki ES4191 User Manual - English - 182 pages

Oki ES4191 User Manual - German - 229 pages

Oki ES4191 User Manual - German - 210 pages

Oki ES4191 User Manual - Dutch - 222 pages

Oki ES4191 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info