492991
82
Zoom out
Zoom in
Previous page
1/203
Next page
Configuring Copy Settings
-82-
4 Press the until the start screen is
displayed.
When [Paper Feed] is set to [Auto], some values cannot
be selected. The selectable values differ according to the
selected scan size.
With some ratios, parts of the document's image may be
missing or margins may appear on the copied outputs.
Memo
When [Paper Feed] is set to [Auto], the paper tray is
automatically selected according to the selected zoom
ratio. If you want to use a specific paper tray, reconfigure
the [Paper Feed] setting.
A paper tray that holds paper other than A4, B5, A5, A6,
letter, legal 13/13.5/14, or executive is not selected even if
[Paper Feed] is set to [Auto]. To select the desired paper
tray, reconfigure the [Paper Feed] setting.
Setting the Zoom Ratio Using the
ten-key pad
1 Press the to enter the [Change
Settings] menu.
2 Press the to select [Zoom] and then
press .
3 Press the to select [Zoom
(25~400%)] and then press .
4 Enter the zoom ratio from 25 to 400%
using the ten-key pad and then press .
- You can set the ratio in 1% increments.
- If you have entered an incorrect value, press the
<CLEAR> key and then enter the correct value.
5 Press the until the start screen is
displayed.
Enabling Continuous Scan Mode
(Continuous Scan)
If you want to copy multiple sets of documents
as a single copy job, enable the continuous scan
mode. It is useful when using [Sort], [N-in-1],
or [Duplex Copy] functions.
Memo
Continuous Scan Mode is also available for faxes, Internet
faxes, as well as for scan functions. You can configure
faxes from [Applied Settings], and Internet faxes and
scans from [Reading Settings].
Reference
For details on the [DuplexCopy] functions, refer to
"Making Duplex Copies (Duplex Copy)".
For details on the [Sort] and [N-in-1] functions, refer to
the User's Manual Advanced.
1 Press the to enter the [Change
Settings] menu.
2 Press the to select [Continuous
Scan] and then press .
3 Press the to select [ON] and then
press .
4 Press the until the start screen is
displayed.
Copying With Continuous Scan
Mode
With the continuous scan mode, you can copy
your documents from the ADF or document
glass, or both of them.
1 Place the first document with text face
up in the ADF or face down on the
document glass.
2 Configure the copy settings if necessary.
Change other copy settings as required.
3 Enter the number of copies with the ten-
key pad.
4 Press to start scanning the first
document.
5
When the [
Please set next document
]
screen is displayed, place the next document
in the ADF or on the document glass.
Note
When changing the place to load the next document, be
sure to remove the document from the place you used first.
6 Press the to select [Start Scan] and
then press .
7 When all sets of the documents are
scanned, press the to select [Scan
Complate] and then press .
Memo
When making N-in-1 and/or duplex copies using the
document glass, the [Please set next document] screen
is displayed after scanning the documents even if
[Continuous Scan] is set to [OFF].
For fax, Internet fax and scan functions, please follow
procedures 5-7 after the first page of the document has
started to be read.
OK
OK
OK
OK
OK
MONO
OK
OK
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4191 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4191

Oki ES4191 User Manual - English - 182 pages

Oki ES4191 User Manual - German - 229 pages

Oki ES4191 User Manual - German - 210 pages

Oki ES4191 User Manual - Dutch - 222 pages

Oki ES4191 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info