492991
66
Zoom out
Zoom in
Previous page
1/203
Next page
Configuring the Network Settings
-66-
Checking the Common Setup
Information
Check the common setup information for Scan To
E-mail, Scan To Network PC, Scan To Fax Server
and Internet Fax, and fill in the corresponding
columns of the Setup Information Form.
Administrator Password for Your
Machine
Enter the administrator password of your
machine in A-1 of the Setup Information Form.
If you are not the administrator of the machine,
ask the administrator the password.
Memo
Passwords are case-sensitive.
The administrator password is set to "aaaaaa" as the
factory default setting.
Gateway address/DNS server
1 Press the <SETTING> key on the
operator panel.
2 Check that [Reports] is selected and
press .
3 Check that [Configuration] is selected
and press .
4 On the confirmation screen press or ,
select [Yes], and press .
5 Enter the address written on the gateway
address line at the bottom right of page
3 of the printed configuration into A-2 on
the setting information sheet.
6 Enter the address written on the DNS
server (primary) line on the bottom right
of the same page into A-3.
It is necessary that the gateway address be configured
beforehand. Also, if using an Internet service provider, it is
necessary that the DNS server be configured. If it has not
been configured (0.0.0.0), follow the procedure on
55 page to configure it.
Setting Up Scan To E-mail and
Internet Fax
The Scan To E-mail, Scan To Fax Server and
Internet Fax functions enable you to send
scanned images as an attached file of an e-mail
to the specified e-mail address on the network.
To use these functions, set up the e-mail setting
for your machine.
When using Auto Delivery or Transmission Data
Save function (MB491/MB491+LP/ES4191 MFP/
MPS4200mb/MPS4700mb only), the following
setup is required.
Checking the E-mail Settings of the
Computer
Note
If a network administrator specifies the values such as a
mail server account, password and e-mail address for your
machine, enter them in the Setup Information Form.
Memo
The procedure below uses Windows Live Mail on Windows
7. If you are using different mail software, refer to the
manual for the e-mail software.
1 Click [Start] and select [Windows Live
Mail].
2 Select the [Tools] menu > [Accounts].
If the menu bar is not displayed, click the
[Menus] icon and then select [Show menu bar].
3 Select the mail account and then click
[Properties].
OK
OK
OK
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4191 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4191 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4191

Oki ES4191 User Manual - English - 182 pages

Oki ES4191 User Manual - German - 229 pages

Oki ES4191 User Manual - German - 210 pages

Oki ES4191 User Manual - Dutch - 222 pages

Oki ES4191 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info