492990
51
Zoom out
Zoom in
Previous page
1/203
Next page
Connecting to a Computer
-51-
Setup
1
11 Depending on the security setting
selected in step 8, execute the settings
from either (1) or (2) below. If [Disable]
is selected, proceed to step 10. (For
security reasons, we do not recommend
setting [Disable].)
(1) When WEP is selected:
a) Press the on the WEP KEY input screen.
Memo
Nothing is set by default. If the WEP KEY is already
set, it is displayed using "*" symbols. When the [OK]
button is pressed, the screen switches to the screen in
step 10 without switching to the screen in step b). If
the right button is pressed to switch to the screen in
step b) when a WEP KEY is set, the set KEY is cleared.
Note
There is not setting for the WEP KEY index. The WEP
KEY index communications with the wireless AP as 1.
b) Enter the same KEY as the WEP KEY set
for the wireless AP that you want to
connect to.
After entering the WEP KEY, move the
cursor to the [Done] field and press .
Memo
After entering the KEY, the key is displayed as "*"
symbols for security reasons.
(2) When WPA-PSK or WPA2-PSK is
selected:
a) Press the to select the encryption type,
and then press .
Memo
The default is [TKIP].
Depending on the model of wireless AP, the mixed
TKIP/AES may be supported. In this case, we
recommend using AES.
b) Press the on the Pre-shared KEY input
screen.
Memo
Nothing is set by default. If a Pre-shared KEY is
already set, "*" is displayed. When the [OK] button is
pressed, the screen switches to that shown in step 10
without switching to the screen shown in step c). If
the right button is pressed to switch to step c) when a
Pre-shared KEY is set, the set KEY is cleared.
c) Enter the same KEY as the Pre-shared KEY
set for the wireless AP that you want to
connect to.
After entering the Pre-shared KEY, move
the cursor to the [Done] field and
press .
Memo
After entering the KEY, the key is displayed as "*"
symbols for security reasons.
12 In the confirmation screen, check the
entered SSID and selected security
settings.
If there are no problems, press the to
select [Yes], and then press .
13 If [Yes] is selected in step 10,
[Searching for connection...] is
displayed in the screen.
When [Connection successful] is
displayed, this equipment is connected to
the wireless LAN.
OK
OK
OK
OK
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4161 in the language / languages: English as an attachment in your email.

The manual is 25,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4161

Oki ES4161 User Manual - English - 182 pages

Oki ES4161 User Manual - German - 229 pages

Oki ES4161 User Manual - German - 210 pages

Oki ES4161 User Manual - Dutch - 222 pages

Oki ES4161 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info