492990
160
Zoom out
Zoom in
Previous page
1/182
Next page
Changing Network Settings From the Web Page
- 160 -
47 Click [Finish].
48 On the IP security policy properties
window, click [OK].
49 On the [Local Security Policy] window,
select the new IP security policy.
50 From the [Action] menu, select
[Assign].
51 Check that for the new IP security policy,
[Policy Assigned] is displayed as
[Yes].
52 Click [X] on the [Local Security Policy]
screen.
Controlling Access Using IP
Address (IP Filtering)
You can control access to the machine using the
IP address. You can set whether to allow
configuration or printing from the IP addresses
specified. By factory default, IP filtering is
disabled.
Note
Be sure to specify the correct IP address. If you specify a
wrong IP address, you cannot access the machine using
the IP protocol.
When you enable IP filtering, the access to and from a host
that is not specified in these steps is rejected.
Memo
You can use only IPv4 for IP filtering.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>
[Security]>[IP Filtering].
4 Follow the on-screen instructions to
specify detailed settings.
Note
If nothing is registered in[Administrator's IP
Address to Register], you may not be able to access
the machine depending on the specified IP address
range.
If you use a proxy server, [Your Current Local
Host/Proxy IP Address] and the IP address of your
host may not match.
5 Click [Send].
The network card reboots to enable the new
settings.
Control Access Using MAC
Address (MAC Address
Filtering)
You can control access to the machine using the
MAC address. You can allow or reject the access
from the specified MAC addresses.
Note
Be sure to specify the correct MAC address. If you specify
the wrong MAC address, you cannot access the machine
via a network.
Memo
You cannot specify to accept or to reject for each address
individually.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager]>
[Security]>[MAC Address Filtering].
4 Follow the on-screen instructions to
specify detailed settings.
Note
If nothing is registered in [Administrator's MAC
Address to Register], you may not be able to access
the machine depending on the specified MAC address.
If you use a proxy server, [Your Current Local
Host/Proxy MAC Address] and the MAC address of
your host may not match.
5 Click [Send].
The network card reboots to enable the new
settings.
Error Notification by E-mail
(E-mail Alert)
You can set the machine to send an error
notification e-mail when an error occurs. You can
set when to be notified:
On a periodical basis
Only when an error occurs
Configuring Your Machine
You can configure the settings for e-mail alert
using the web page.
Memo
If you have configured the settings for Scan To Mail / Scan
To Internet Fax that are described in the "User's Manual
Basic", the server configuration is complete.
When you specify a domain name in [SMTP Server],
configure the DNS server in the [TCP/IP] setting.
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4161 in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4161

Oki ES4161 User Manual - English - 203 pages

Oki ES4161 User Manual - German - 229 pages

Oki ES4161 User Manual - German - 210 pages

Oki ES4161 User Manual - Dutch - 222 pages

Oki ES4161 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info