492990
156
Zoom out
Zoom in
Previous page
1/182
Next page
Changing Network Settings From the Web Page
- 156 -
Changing Network Settings From the Web Page
This section explains how to change the network settings from the machine's web page.
To access the machine's web page, your computer must meet the following conditions:
TCP/IP is enabled.
Microsoft Internet Explorer 6.0 or later, Safari 3.0 or later, or Firefox 3.0 or later is installed.
Memo
Ensure that the security setting of the web browser is set to a middle level, or that cookies are allowed.
To enter the [Admin Setup] menu, it is necessary to log in as the administrator. The factory default administrator password is
"aaaaaa".
Reference
Some of the following settings can be performed on other utilities. For details, refer to "Network Setting Items" P. 133.
Encrypting Communication by
SSL/TLS
You can encrypt communication between your
computer and the machine. Communication is
encrypted by SSL/TLS in the following cases:
Change of the machine settings from the web page
IPP printing
Direct print
LDAP search
Send data via SMTP or FTP
Print received data via SMTP or FTP
Creating a Certificate
You can create a certificate on the web page. The
following two certificates are available:
A self-signed certificate.
A certificate created by a certificate authority.
Note
If you change the machine IP address after you create a
certificate, the certificate becomes invalid. Be sure not to
change the machine's IP address after creating a
certificate.
1 Access the machine's web page and log
in as the administrator.
2 Select [Admin Setup].
3 Select [Network Manager] >
[Security] > [Encryption (SSL/TLS)].
4 Follow the on-screen instructions to
specify detailed settings.
Memo
The machine's IP address is set to [Common Name].
5 Click [Send].
6 Check the settings and click [OK].
7 If you are creating a self-signed
certificate, follow the on-screen
instructions and close the web page.
Then go to "Enabling Encryption".
If you are getting a certificate issued by
a certificate authority, go to step 8.
8 Follow the on-screen instructions to send
a CSR to a certificate authority.
9 Click [OK].
10 Follow the on-screen instructions to
install a certificate from the certificate
authority.
11 Click [Send].
12 Go to "Enabling Encryption".
Enabling Encryption
After creating a certificate, perform the following
procedure to enable encryption.
When you change the settings from the web
page to enable encryption, communication is
encrypted immediately after that change has
been made.
1 Perform "Creating a Certificate" steps 1
to 3 to enter the encryption screen.
2 Select [Enable] for the desired protocol
on which encryption is applied.
3 Click [Encryption Strength Settings].
4 Select the encryption strength and click
[OK].
5 Click [Send].
156


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki ES4161 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki ES4161 in the language / languages: English as an attachment in your email.

The manual is 7,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki ES4161

Oki ES4161 User Manual - English - 203 pages

Oki ES4161 User Manual - German - 229 pages

Oki ES4161 User Manual - German - 210 pages

Oki ES4161 User Manual - Dutch - 222 pages

Oki ES4161 User Manual - Dutch - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info