Menu functions> 68
H
OW
TO
CHANGE
THE
SETTINGS
- A
DMINISTRATOR
You can set whether to ENABLE or DISABLE each category in the
user menu.
Disabled categories are not displayed in the User’s menu.
Only a system administrator can change these settings.
1. Turn OFF the printer.
2. Turn ON the printer while pressing the “ENTER” button.
When [ADMIN MENU] appears, take your finger off the
button.
3. Press the “ENTER” button.
4. When [ENTER PASSWORD] appears, press the “MENU+”
or “MENU-” button several times to display the 1st line of
the password and then press the “ENTER” button.
5. Enter your 4- to 9-digit password.
The default password is “aaaa”.
6. Press the “MENU+” button until the “category” you want
to change is displayed.
7. Press the “ENTER” button.
8. Press the “MENU+” or “MENU-” until the “item” you want
to change is displayed.
9. Press the “ENTER” button.
10. Initialization of the flash memory prompts with the
message “ARE YOU SURE?”. Confirm whether the change
may be executed or not.
11. To execute it, press the “MENU+” button or “MENU-”
button to display “YES” and then press the “ENTER”
button. The printer automatically reboots.
12. When [PLEASE POW OFF/SHUTDOWN COMP] is displayed,
turn the printer OFF/ON
13. Press the “MENU+” button or “MENU-” until the “setting”
you want is displayed.
14. Press the “ENTER” button to enter [*] on the right side of
the setting selected.
