665206
109
Zoom out
Zoom in
Previous page
1/139
Next page
- 109 -
Replacing Consumables and Maintenance Units
4
4. Maintenance
14 Close the front cover (2).
Note
The front cover cannot be closed if the output tray is
not closed securely.
2
15 Please recycle image drums.
Memo
If you must dispose of an image drum, put it in a
plastic bag or similar container and dispose of it in
accordance with your municipality’s ordinances or
guidelines.
If the light-shielding lm of the image drum becomes
dirty, wipe the lm by following the procedures
below.
(1) Open the front cover.
(2) Open the output tray.
(3) Remove the image drum.
(4) Wipe the light-shielding lm with soft
tissue paper.
(5) Put the image drum back to the
printer.
(6) Close the output tray by pushing the
both sides of the cover rmly.
(7) Close the front cover.
Replacing the Belt Unit
Life Span of Belt Unit
When the “Belt Unit Near Life” message
appears on the display screen, prepare a
replacement belt unit. You can keep printing
approximately 2000 pages until the next
message appears.
When the “Change Belt Unit” message
appears, replace the belt unit.
The life expectancy of the belt unit is
approximately 80,000 pages for A4 simplex
printing (three pages per job).
Note
The actual number of pages you can print with the belt
unit depends on how you use it.
Note
Though opening and closing the output tray may extend
the life of the belt unit somewhat, you should replace it
soon after the “Change Belt Unit” is displayed to prevent
malfunction.
If you replace the belt unit, use it until the end of its
useable life. If you remove the belt unit and install and
use another one before its usable life has expired, the use
life will not be correctly displayed.
Press the scroll button or button > [Admin Setup] >
[System Setup] > [Near Life Status] is set to [Disable],
the [Belt Unit Near Life] message does not appear.
Procedure for Replacement
Note
The image drum (the green tube) is very delicate. Handle
it carefully.
Do not expose the image drum to direct sunlight or very
bright interior light (approximately more than 1500 lux).
Even under the normal interior light, do not leave it for
more than 5 minutes.
1 Prepare a replacement belt unit.
2 Turn off your printer by pressing the
power switch.
Reference
“Turning Off the Power” P.21
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C823dn at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C823dn in the language / languages: English as an attachment in your email.

The manual is 45,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C823dn

Oki C823dn User Manual - German - 151 pages

Oki C823dn User Manual - Dutch - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info