536474
109
Zoom out
Zoom in
Previous page
1/124
Next page
- 109 -
Changing Network Settings From the Web Page
5
5. Network Settings
Setting Up Your Printer As an IPP
Printer (for Mac OS X)
Add the printer to your computer as an IPP
printer.
1 Insert the software DVD-ROM into the
computer and install the driver.
Reference
"User's Manual (Setup)"
2 Select [System Preferences] from the
Apple menu.
3 Click [Print & Scan] ([Print & Fax] for
Mac OS X 10.5 and 10.6).
4 Click [ + ].
5 Click the [IP] tab.
6 From [Protocol], select [IPP (Internet
Printing Protocol)].
7 Enter the printer’s IP address in
[Address].
8 Enter “ipp/Ip” in [Queue].
9 Click [Add].
10 Click [Continue].
11 Conrm that the printer is registered in
[Print & Scan] ([Print & Fax] for Mac
OS X 10.5 and 10.6).
Performing IPP Printing
Memo
The following steps are explained using NotePad as an
example. The steps and menus may differ depending on
the application you use.
1 Open the le you want to print.
2 From the [File] menu, select [Print].
3 Select the IPP printer you created from
[Select Printer], and then click [Print].
Encrypting Communication by
IPSec
You can encrypt communication between your
computer and the printer.
The communication is encrypted by IPSec. When
IPSec is enabled, encryption is applied for all the
applications using IP protocols.
You can specify up to 50 hosts by their IP
addresses. When a host that is not registered
tries to access the printer, it is rejected. When
you try to access a host that is not registered,
the attempt is invalid.
Be sure to congure the printer before
conguring your computer.
Memo
You must have a pre-shared key readied in advance.
Conguring Your Printer
In order to enable IPSec, your printer must rst
be congured from the web page.
Note
When you enable IPSec, communication with a host not
specied in this procedure is rejected.
Memo
Be sure to make a note of the values you specify in these
steps. They are necessary when you congure the IPSec
settings on your computer.
1 Access the printer’s web page and log in
as the administrator.
2 Select [Admin Setup].
3 Select [Network Setup] > [Security]
> [IPSec].
4 Follow the on-screen instructions to
specify detailed settings.
Memo
Either [ESP] or [AH] must be enabled in the
conguration for "Phase2 Proposal".
5 Click [Submit].
The network card reboots to enable the new
settings.
Note
If you were unable to set up IPSec because of an
inconsistency between the parameters that were
specied, you will be unable to access the web page. In
this case, either disable IPSec from the operation panel of
the printer, or initialize the network settings.
109


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C822n at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C822n in the language / languages: English as an attachment in your email.

The manual is 5,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C822n

Oki C822n User Manual - German - 136 pages

Oki C822n User Manual - Dutch - 136 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info