665229
42
Zoom out
Zoom in
Previous page
1/104
Next page
Menu functions - C801 and C810 > 42
C
OLOUR
MENU
The printer automatically adjusts colour balance and density at appropriate intervals,
optimising the printed output for bright white paper viewed in natural daylight conditions.
The items on this menu provide a means of changing the default settings for special or
particularly difficult print jobs. Settings revert to their default values when the next print
job is complete.
S
YSTEM
CONFIGURATION
MENU
This menu adjusts general printer settings to suit the way you prefer to work.
ITEM SETTINGS EXPLANATION
DENSITY CONTROL AUTO
MANUAL
Selecting this will permit automatic adjustment of the
colour density.
ADJUST DENSITY EXECUTE Image density will be automatically adjusted at power
on, when a new image drum or toner cartridge is
installed, and at intervals of 100, 300 and 500 drum
counts. If a 500 drum count interval occurs during a
print job it will occur at the end of that job, and will
take up to 55 seconds.
AJST REGSTRATION EXECUTE Performs automatic colour registration adjustment.
Normally this is done on power on and when the top
cover is opened and then closed. This process
accurately aligns the cyan, magenta and yellow images
to the black image.
C REG FINE ADJ
M REG FINE ADJ
Y REG FINE ADJ
-3~0~+3
-3~0~+3
-3~0~+3
Performs fine adjustment of image timing in relation to
the black image component.
ITEMS SETTINGS EXPLANATION
POW SAVE DELAY 1
3
5
15
30
60
240
Adjusts the idling time before the printer automatically
switches into power saving mode. In this mode power
consumption is reduced to a low level required to just
keep the printer operating and ready to receive data.
When a job is sent the printer will require a warm-up
time of up to 1 minute before printing can begin.
CLRABLE WARNING ONLINE
JOB
When ONLINE, non-critical warnings, such as requests
for a different paper size, can be cleared by pressing
the
ON LINE button. When set to JOB, they are
cleared when the print job resumes.
MANUAL TIMEOUT OFF
30
60
Specifies how many seconds the printer will wait for
paper to be fed before cancelling the job.
WAIT TIMEOUT OFF~90~300 Specifies how many seconds the printer will wait when
received data pauses before forcing a page eject. In
PostScript Emulation mode the job will be cancelled if
timeout occurs.
TONER LOW CONTINUE CONTINUE
STOP
Specifies whether the printer should continue printing
even after a low toner condition is detected.
JAM RECOVERY ON
OFF
Specifies whether the printer should perform jam
recovery after a paper jam has occurred. If ON, the
printer will attempt to print again any pages lost due to
a paper jam once the jam has been cleared.
ERROR REPORT ON
OFF
Sets whether an error report is printed when an
internal fault occurs.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C821 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C821 in the language / languages: English as an attachment in your email.

The manual is 6,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C821

Oki C821 User Manual - German - 115 pages

Oki C821 User Manual - Dutch - 112 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info