492944
35
Zoom out
Zoom in
Previous page
1/96
Next page
Menu functions - C830 > 35
H
OW
TO
CHANGE
THE
SETTINGS
- U
SER
It should be noted that many of these settings can be, and often are, overridden by settings
in the Windows printer drivers. However, several of the driver settings can be left at
“Printer Setting”, which will then default to the settings entered in these printer menus.
Where applicable, factory default settings are shown in bold type in the following tables.
In the normal operating condition, known as “standby,” the printer’s LCD window will show
Ready to Print. In this condition, to enter the menu system, press the up and down Menu
buttons on the operator panel to move up and down through the list of menus until the
menu you wish to view is displayed. Then proceed as follows:
1. Press Enter to enter the menu.
2. Use the up or down Menu buttons on the control panel to scroll through the menus.
When the item you want to change is displayed, press Enter to view the sub-menus
for that item.
3. Use the up or down Menu buttons to move up and down through the sub-menu
items. When the item you want to change is displayed press Enter to display the
setting.
4. Use the up or down Menu buttons to move up and down through the available
settings for the sub-menu item. When the item you want to change is displayed
press Enter to display the setting. An asterisk (*) will appear next to the setting,
indicating that this setting is currently in effect.
5. Do one of the following:
> Press Back again to move up to the list of menus;
or…
> Press On Line or Cancel to exit from the menu system and return to standby.
H
OW
TO
CHANGE
THE
SETTINGS
- A
DMINISTRATOR
You can set whether to ENABLE or DISABLE each category in the user menu.
Disabled categories are not displayed in the User’s menu. Only a system administrator can
change these settings.
1. Turn OFF the printer.
2. Turn ON the printer while pressing the Enter button.
When Boot Menu appears, take your finger off the button.
3. Press the Enter button.
4. When Enter Password appears, press the up or down MENU button, each time
followed by Enter, then Enter several times to input the 1st line of the your
password, and then press the Enter button.
Enter your 4 to 9 digit password.
(The default password is aaaaaa).
5. Press the Enter button.
6. Press the up or down Menu button until the “category” you want to change is
displayed.
7. When it is, press the Enter button.
8. Press the up or down Menu button until the “item” you want to change is displayed.
9. When it is displayed, press the Enter button.
NOTE:
When you have changed any settings in the USB menu, turn the printer OFF,
then ON again.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C810 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C810 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C810

Oki C810 User Manual - German - 115 pages

Oki C810 User Manual - Dutch - 103 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info