665201
34
Zoom out
Zoom in
Previous page
1/93
Next page
Menu functions > 34
Network
Setup (cont.)
Network Scale Normal
Small
When
Normal
is selected, the network can work
effectively even when it is connected to a HUB that
has a spanning tree feature. However, printer start
up time gets longer when computers are
connected with two or three small LANs.
When
Small
is selected, computers can cover
from two or three small LANs to a large LAN, but
may not work effectively when the network is
connected to a HUB with a spanning tree feature.
Gigabit Network Enable
Disable
Sets whether to support a gigabit network.
When it is disabled, 1000Base-T Full/Half
duplex connection cannot be made.
Hub Link Setting Auto Negotiate
100Base-TX Full
100Base-TX Half
10Base-T Full
10Base-T Half
Sets a method to link to a HUB. When Auto is
set, a connection method to a HUB is selected
automatically and attempts to connect.
If another method is selected, attempts to connect
to a HUB only by the selected connection method.
Network Factory
Defaults
Execute Specifies whether to initialize the network
factory default settings for the Network.
USB Setup USB Enable / Disable Enables / Disables the USB port.
Speed 480 / 12 Mbps Selects the interface speed. After setting
change the menu, the printer restarts on exit.
Soft Reset Enable / Disable
Enables or disables the
Soft Reset
command.
Serial Number Enable / Disable Specifies whether to Enable or Disable a
USB serial number.
The USB serial number is used to identify the
USB device connected to your PC.
Offline Receive Enable / Disable Offline receive.
USB Memory Interface Enable / Disable Sets able/disable of USB memory I/F.
Connected Host Normal
Specific
If the printer is connected to a specific host
by USB, set it to Specific to print from this
specific host.
Print Setup Personality Auto
PostScript
PCL
XPS
IBM PPR
EPSON FX
Selects a printer language.
Copies 1- 999 Selects the number of copies.
This setting is disabled for Local Print except
for Demo Page.
Duplex On/Off Specifies duplex print (option) if a duplex
unit is installed and enabled
Binding Long Edge
Short Edge
Specifies Binding in duplex printing.
Display Conditions: A duplex unit is installed
and enabled.
Refer to Duplex” on page 34.
Media Check Enable
Disable
Sets whether the printer checks the matching
of printed data size and that of the tray. Only
standard sizes are checked.
ITEM SETTINGS EXPLANATION
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C712 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C712 in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C712

Oki C712 User Manual - German - 99 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info