492939
43
Zoom out
Zoom in
Previous page
1/82
Next page
Menu functions > 43
USB Setup
This menu controls the operation of the printer’s USB data interface.
When you have changed any settings in the USB menu, turn the printer OFF, then ON
again.
Security Setup
ITEM SETTINGS EXPLANATION
USB Enable / Disable ENABLES / DISABLES the USB port.
Speed 480 / 12 Mbps Selects the interface speed. After setting change the
menu, the printer restarts on exit.
Soft Reset Enable / Disable Enables or disables the SOFT RESET command.
Offline Receive Enable / Disable OFFLINE RECEIVE.
Serial Number Enable / Disable Specifies whether to ENABLE or DISABLE a USB serial
number.
The USB serial number is used to identify the USB device
connected to your PC.
NOTE
This menu only displays if the optional SD card is installed.
ITEM SETTINGS EXPLANATION
Job Limitation Off
Encrypted Job
Job limitation mode control.
Jobs other than specified ones are rejected.
Make Secure SD
Card
Execute SD Card encoding function is made effective.
Formation of the cipher key and encoding function (security mode)
information is turned on. At the same time, it initializes the SD card.
After execution, the following confirmation messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to the previous menu.
If Yes is selected, the printer will be automatically rebooted and the
encoding function will become effective.
Display Conditions:
SD Card is installed, SD Card encoding function invalidity and
Storage Setup > Enable Initialization > Yes
Make Normal SD
Card
Execute SD Card encoding function is set to invalid.
Deletion of the cipher key and encoding function (security mode)
information is turned off. At the same time, it initializes the SD card.
After execution, the following confirmation messages will appear.
Are You Sure?
Yes
No
If No is selected, the display will return to the previous menu.
If Yes is selected, the printer will be automatically rebooted and the
encoding function will become invalid.
Display Conditions:
SD Card is installed, SD Card encoding function invalidity and
Storage Setup > Enable Initialization > Yes
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C711 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C711 in the language / languages: English as an attachment in your email.

The manual is 5,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info