665223
60
Zoom out
Zoom in
Previous page
1/72
Next page
Installing upgrades > 60
A
DJUSTING
W
INDOWS
PRINTER
DRIVERS
Once your new upgrade has been installed, you may need to update the Windows printer
driver so that the additional features are available to your Windows applications.
Remember that if your printer is shared between users on different computers, the driver
must be adjusted on each user’s machine.
The illustrations shown here are for Windows XP. Other Windows versions may appear
slightly different, but the principles are the same.
If you have installed a memory upgrade it is not necessary to change the printer driver,
and you can ignore this section.
If you have installed a duplex unit or hard disk, proceed as follows:
1. Open the Printers window (called “Printers and Faxes” in
Windows XP) via the Start Menu or from the Windows
Control Panel.
2. Right-click the printer icon for this printer, and choose
Properties from the pop-up menu.
3. On the Device Options tab, check the box for the upgrade
you have just installed.
4. Click OK to close the properties window, and then close the
Printers window.
S
TORAGE
C
ABINET
Instructions for installing the Storage Cabinet are supplied with the Cabinet.
D
ATA
P
ROTECTION
K
IT
The Data Protection Kit is a system for encoding data to be stored in the hard disk and to
prevent any unauthorised access without a cipher key.
The mechanical instructions for installing the Data Protection Kit HDD are the same as the
instructions for installing the optional “Hard disk drive” on page 57. After installing the
HDD, follow the instructions that come with the Kit to finalise the Data Protection Kit
installation
After installing the Data Protection Kit in the machine, you will not be able to do the
following:
> Remove the Data Protection Kit.
> Replace it with a standard built-in hard disk.
> Replace it with another Data Protection Kit.
Further:
> If you implement any such operations, the machine will indicate an error and you
will not be able to print.
> If the control board of the machine is damaged, data stored in the Data Protection
Kit will be lost.
> After installing the security kit, you can not revert to the condition before the
installation.
> If the Data Protection Kit becomes damaged, the printer will not work.
CAUTION!
When turning off the power, make sure to use the Shutdown Menu.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C700 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C700 series in the language / languages: English as an attachment in your email.

The manual is 6,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C700 series

Oki C700 series User Manual - German - 75 pages

Oki C700 series User Manual - Dutch - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info