665196
43
Zoom out
Zoom in
Previous page
1/131
Next page
- 43 -
2. Setting Up
Wireless LAN (AP mode) directly connects wireless devices (computers, tablets,
smartphones, etc.) to the machine without using a wireless LAN access point.
If there is metal, aluminum sash, or a reinforced concrete wall between the machine and wireless devices,
connections may be harder to be established.
Up to four devices can be connected to the machine via the wireless LAN (AP mode). The fifth device will be rejected.
Automatic connection (push-button)
If your wireless devices supportWPS-PBC (push button), you can connect to the wireless
LAN (AP mode) with the WPS button.
Manual Setup
If your wireless devices do not support WPS-PBC (push button), you can enter [SSID] and
[Password] of the machine in your wireless devices to connect to the wireless LAN (AP
mode).
Automatic connection (push-button)
If your wireless devices support WPS-PBC (push button), you can connect to the wireless
LAN (AP mode) with the WPS button.
1
Confirm the position of the WPS button on your wireless device by the manual
attached to the device.
2
Turn the machine on.
If the "Do you want to Set-up wireless?" message appears, select [No (Do not show next time)].
3
Press the button to select [Setting] and press the (Enter) button.
4
Press the button to select [Admin Setup] and press the (Enter) button.
5
Enter the administrator password, and then press the (Enter) button.
The factory default administrator password is "999999". If the administrator password is
changed, enter the updated password.
6
Press the button to select [Network Menu] and press the (Enter) button.
7
Press the button to select [Network Setup] and press the (Enter) button.
8
Press the button to select [Wireless(AP Mode) Setting] and press the
(Enter) button.
The [It is not possible to use the Wireless(infrastructure) at the same time.] message is
displayed for approximately five seconds.
9
Select [Enable] and then press the (Enter) button.
10
Press the button to select [Automatic Setup (Pushbutton)] and press the
(Enter) button.
11
When [Pushbutton method] is displayed, select [Yes].
12
Start the WPS-PBC (push button) operation on your wireless device to
connect to the machine.
When the following screen appears, the setup of the wireless LAN is completed.
In case of connection failure, follow the steps in "Manual Setup" to try again.
Manual Setup
If your wireless devices do not support WPS-PBC (push button), you can enter [SSID] and
[Password] of the machine in your wireless devices to connect to the wireless LAN.
1
Turn the machine on.
If the "Do you want to Set-up wireless?" message appears, select [No (Do not show next time)].
2
Press the button to select [Setting] and press the (Enter) button.
3
Press the button to select [Admin Setup] and press the (Enter) button.
4
Enter the administrator password, and then press the (Enter) button.
The factory default administrator password is "999999".
5
Press the button to select [Network Menu] and press the (Enter) button.
6
Press the button to select [Network Setup] and press the (Enter) button.
Connecting to the Machine Directly
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C532 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C532 in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C532

Oki C532 User Manual - German - 135 pages

Oki C532 User Manual - Dutch - 134 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info