492996
48
Zoom out
Zoom in
Previous page
1/94
Next page
Menu functions > 48
PCL
EMULATION
This menu controls settings effective when the printer is operating in PCL emulation mode.
WAIT TIMEOUT 5~40 SEC~300, OFF Specifies how many seconds the printer will wait when
received data pauses before forcing a page eject. In
PostScript Emulation mode the job will be cancelled if
timeout occurs.
LOW TONER CONTINUE
STOP
Specifies whether the printer should continue printing
even after a low toner condition is detected.
JAM RECOVERY ON
OFF
Specifies whether the printer should perform jam
recovery after a paper jam has occurred. If ON, the
printer will attempt to re-print any pages lost due to a
paper jam once the jam has been cleared.
ERROR REPORT ON
OFF
If ON, the printer will print error details when a
PostScript Emulation error occurs.
Note: Applies tp PS & PCL XL only.
ITEMS SETTINGS EXPLANATION
FONT SOURCE RESIDENT /
RESIDENT2
Specifies the location of the PCL default font. Normally
this will be INTERNAL unless additional fonts are
installed in the expansion ROM slot or additional fonts
have been downloaded to RAM as permanent fonts.
FONT NO. I0 ~ I90 Sets the current default font number from the currently
selected source.
FONT PITCH 0.44CPI~
10.00CPI~
99.99CPI
Sets the width of the PCL default font in characters/inch
(CPI).
Default font is the fixed-pitch, scalable font. The value is
displayed to the second decimal place
Displayed only when the font selected in Font No. is
fixed-spacing, scalable font.
FONT HEIGHT 4.00 POINT~12.00
POINT~999.75 POINT
Height of the PCL default font.
Note: This menu item is displayed only when the font
selected in Font No. is a proportional-spacing, scalable
font.
SYMBOL SET PC-8
(Default Symbol Set
only shown)
PCL symbol set. If the font source and number are
changed to one which does not support the selected
symbol set, this must be changed to an available
symbol set for that font.
A4 PRINT WIDTH 78 COLUMN
80 COLUMN
Sets the number of columns subject to Auto LF with A4
paper in PCL. This is the value when Auto CR/LF Mode is
set to OFF with the 10CPI character.
WHITE PAGE SKIP OFF / ON Selects whether blank pages are printed or not.
CR FUNCTION CR / CR+LF Selects whether a received carriage return character
(0Dh) also causes a line feed.
LF FUNCTION LF / LF+CR Selects whether a received line feed character (0Ah)
also causes a carriage return.
PRINT MARGIN NORMAL
1/5 INCH
1/6 INCH
Sets the non-printable page area. NORMAL is PCL
compatible.
TRUE BLACK OFF / ON Selects whether black image data is printed using black
toner (ON) or 100% CMY (OFF). (Valid in PCL emulation
mode only.)
ITEMS SETTINGS EXPLANATION
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C531 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C531 in the language / languages: English as an attachment in your email.

The manual is 12,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki C531

Oki C531 User Manual - German - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info