492936
47
Zoom out
Zoom in
Previous page
1/95
Next page
Menu functions > 47
C
OLOR
MENU
The printer automatically adjusts colour balance and density at appropriate intervals,
optimising the printed output for bright white paper viewed in natural daylight conditions.
The items on this menu provide a means of changing the default settings for special or
particularly difficult print jobs.
ITEM SETTINGS EXPLANATION
DENSITY CONTROL AUTO
MANUAL
If set to AUTO, image density will be automatically
adjusted at power on, when a new image drum or toner
cartridge is installed, and at intervals of 100, 300 and
500 drum counts. If a 500 drum count interval occurs
during a print job it will occur at the end of that job, and
will take up to 55 seconds. If set to manual, this
adjustment will only be performed when initiated by the
next menu item.
ADJUST DENSITY EXECUTE Selecting this will activate adjustment of the colour
density.
COLOR TUNING PRINT PATTERN Selecting this item prints the colour tuning pattern to
help you adjust the colour balance.
C HIGHLIGHT
C MID-TONE
C DARK
M HIGHLIGHT
M MID-TONE
M DARK
Y HIGHLIGHT
Y MID-TONE
Y DARK
K HIGHLIGHT
K MID-TONE
K DARK
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
Adjusts image density for each colour component (cyan,
magenta, yellow and black). Normal setting is 0.
C DARKNESS
M DARKNESS
Y DARKNESS
K DARKNESS
-3~0~+3
-3~0~+3
-3~0~+3
-3~0~+3
Adjusts darkness of each colour component (cyan,
magenta, yellow and black). Normal setting is 0.
AJST REGISTRATION EXECUTE Performs automatic colour registration adjustment.
Normally this is done on power on and when the top
cover is opened and then closed. This process
accurately aligns the cyan, magenta and yellow images
to the black image.
C REG FINE AJST
M REG FINE AJST
Y REG FINE AJST
-3~0~+3
-3~0~+3
-3~0~+3
P
erforms fine adjustment of image timing in relation to
the black image component.
INK SIMULATION OFF
SWOP
EUROSCALE
JAPAN
Selects from a range of industry standard colour
swatches.
Note: This function only applies to PS models
UCR LOW
MEDIUM
HIGH
Selects limitation of the toner layer thickness.
If paper curl occurs in dark printing, selecting MEDIUM
or LIGHT sometimes helps reduce curl.
CMY100% DENSITY DISABLE
ENABLE
When enabled, black areas are produced using 100% C,
M, and Y instead of black. This results in a glossier
finish.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C510 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C510 in the language / languages: English as an attachment in your email.

The manual is 7,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info