665195
76
Zoom out
Zoom in
Previous page
1/82
Next page
Troubleshooting > 76
When the error message “UNKNOWN CONSUMABLE” is displayed, you can use any
consumables in your product, but you must accept the risks of using non-genuine
consumables. If the use of non-genuine consumables causes damage to the product or
results in your product not functioning to its full specification, then such damage or effect
on the product is not covered by warranty. To accept these risks and to restore function;
1. Turn off your product.
2. Press and hold the CANCEL but
ton and turn your product on.
3. After start up, release the CANCEL bu
tton.
Horizontal Lines and
spots appear
periodically.
When the interval is about
94
mm (4in), the image drum
(the green tube) is damaged
or dirty.
Wipe it lightly with a soft cloth.
R
eplace the image drum
cartridge when it is damaged.
When the interval is about
30mm
(1.2in), there may be
foreign particles in the image
drum cartridge.
Open/close output tray, and print
ag
ain.
When the interval is about
86mm
(3.4in), the fuser unit
is damaged.
Replace the fuser unit.
The image drum cartridge
h
as been
exposed to light.
Replace the image drum
cartridge if the problem is not
resolved.
White area of paper is
li
ght
ly stained.
Paper contains static. Use paper stored in proper
temperature and humidity
conditions.
Too thick paper is used. Use thinner paper.
The toner is low. Open output tray and tap the
ca
rtri
dge a few times to evenly
distribute any remaining toner. If
symptoms persist, replace the
toner cartridge.
Periphery of the letters
is
smu
dged.
The LED head is dirty. Wipe the LED head with a soft,
lint-free cloth.
Toner comes off when
it
is r
ubbed.
The thickness and type of the
paper are incorrectly set.
Set the correct value of media
type and media weight in the
Media menu or set one value
lighter for media weight.
Recycled paper is used. Set one value thicker for media
we
ight in
the Media menu.
Glossiness is not
un
ifor
m.
The thickness and type of the
paper are incorrectly set.
Set the correct value of media
type and media weight in the
Media menu or set one value
lighter for media weight.
NOTE
This operation will be recorded for future reference.
SYMPTOMS POSSIBLE CAUSES STEPS TO TAKE
76


Need help? Post your question in this forum.

Forumrules
1

Forum

oki-c332

Reset search

  • is there a way to print personal checks on the OKI C332 printer? I have a DOT matrix printer I now use but would like to try it on the OKI printer Submitted on 30-7-2022 at 11:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C332 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C332 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info