665195
29
Zoom out
Zoom in
Previous page
1/82
Next page
Operator panel > 29
TRAY
CONFIG
(c
ont.)
TRAY2
CO
NFIG
(cont.)
Y DOMENSION 210 MILLIMETER
~
279 MILLIMETER
~
297 MILLIMETER
~
356 MILLIMETER
Specifies paper length of Custom paper as a
de
fault value.
Sets a paper size in the same direction as the
paper ru
n direction.
MEDIATYPE PLAIN
LETTERHEAD
BOND
RECYCLED
CARD STOCK
ROUGH
GLOSSY
USERTYPE1
USERTYPE2
USERTYPE3
USERTYPE4
USERTYPE5
Selects the type of media loaded in this tray (if
insta
lled). This will help the printer to adjust its
internal operating parameters, such as engine
speed and fusing temperature, to better
accommodate the media to be fed.
For example, letterhead may benefit from a
s
light
ly lower fusing temperature to ensure
that its ink does not offset.
Note: USERTYPEn are displayed only if
register
ed in the host PC/Server.
MEDIAWEIGHT LIGHT
MEDIUM LIGHT
MEDIUM
HEAVY
ULTRA HEAVY1
Adjusts the printer for the weight of paper
s
toc
k loaded in this tray (if installed).
PAPERFEED MP TRAY
TRAY1
TRAY2
Selects the default tray for paper feed, Tray 1
(u
pper
), Tray 2 (lower, if installed) or MP tray
(multi purpose tray).
AUTO TRAY SWITCH ON
OFF
If two trays contain identical paper, the printer
can swi
tch to an alternative source when the
current tray runs out in the middle of a print
job.
TRAY SEQUENCE DOWN
UP
PAPER FEED TRAY
Determines tray sequence order when
auto
matically switching.
DUPLEX LAST PAGE SKIP BLANK PAGE
ALWAYS PRINT
When SKIP BL
ANK PAGE is selected and a
print job has an odd number of pages, the final
page will be printed as Simplex.
When ALWAYS PRINT is
selected and the
print job contains an odd number of pages, the
final page will be printed as Duplex.
STSTEM
AD
JUST
POW
SAVE TIME 1 MIN
2 MIN
3 MIN
4 MIN
5 MIN
10 MIN
15 MIN
30 MIN
60 MIN
Adjusts the idling time before the printer
automatically switches into power saving
mode. In this mode power consumption is
reduced to a low level required to just keep the
printer operating and ready to receive data.
When a job is sent the printer will require a
warm-up time of up to 1 minute before
printing can begin.
ITEM SETTINGS EXPLANATION
29


Need help? Post your question in this forum.

Forumrules
1

Forum

oki-c332

Reset search

  • is there a way to print personal checks on the OKI C332 printer? I have a DOT matrix printer I now use but would like to try it on the OKI printer Submitted on 30-7-2022 at 11:25

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki C332 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki C332 in the language / languages: English as an attachment in your email.

The manual is 3,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info