97668
63
Zoom out
Zoom in
Previous page
1/78
Next page
Daily care > 63
W
HEN
MOVING
THE
PRINTER
Carry out the following procedure when moving the printer.
Correct moving procedure
Carry out the following procedure when moving the printer.
1. Press the power switch of this printer to the <O> position to switch the power off.
2. Remove all cords, such as the power cord and interface cables.
3. Remove any paper in the centre output tray and MFP tray (tray 5).
4. Pull out the paper tray from the printer and remove any paper in the tray.
Keep the paper wrapped and away from humidity and dirt.
WARNING!
> The machine, without the optional accessories, paper trays,
consumables and paper, weighs 41.0 kg or 90lbs. When moving
the equipment, make sure that there are two or more persons
carrying it.
> If the duplex unit (optional) or A4 tray (optional) has been
installed, uninstall it before moving the printer. If these are not
fixed securely to the printer, they may fall to the ground and
cause injuries.
> When lifting the machine, be sure to observe the following
points, failure to do so may cause the machine to fall and result in
injuries.
2 persons, one facing the front of the machine (control
panel) and the other facing the back, should firmly grip the
recessed areas on the bottom part of both sides of the
machine. Never try to lift the machine by gripping any other
areas.
Bend your knees to avoid possible injuries to your back.
CAUTION!
Do not tilt the machine more than 10 degrees.
WARNING!
Never touch a power cord with wet hands. Danger of electric shock
exists. When unplugging the machine, grasp the plug instead of the
cord. Forcibly pulling on a chord can damage it and cause fire or
electric shock.
63


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B930N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B930N in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki B930N

Oki B930N User Manual - Dutch - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info