97668
60
Zoom out
Zoom in
Previous page
1/78
Next page
Replacing consumables > 60
F
USER
UNIT
The fuser unit is included as one of the regular replacement parts. When you are to replace
a fuser unit, open the box of the regular replacement parts and get the new fuser unit
ready.
R
EPLACING
THE
FUSER
UNIT
1. Switch off the power of the printer and leave it idle for 30 minutes until the fuser
unit cools down.
2. Open cover A.
3. Loosen the two knobs (3) securing the fuser to the frame.
4. Pull the fuser (1) towards you by holding the two handles (2).
5. Unpack the new fuser from its container.
6. Insert carefully the fuser by holding the two handles.
7. Secure the fuser by tightening the two knobs.
8. Close cover A.
9. Switch the printer power on.
WARNING!
> Never touch a labelled area found on or near the heat roller.
You can get burned. If a sheet of paper is wrapped around the
heat roller, do not try to remove it by yourself to avoid injuries
or burns. Switch off the printer immediately, and contact your
service provider.
> Be sure to switch off and unplug the machine before accessing
the interior of the machine for cleaning, maintenance, or fault
clearance. Access to a live machine’s interior can cause electric
shock.
60


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B930N at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B930N in the language / languages: English as an attachment in your email.

The manual is 3,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Oki B930N

Oki B930N User Manual - Dutch - 83 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info