492960
38
Zoom out
Zoom in
Previous page
1/51
Next page
Troubleshooting > 38
N
ETWORK
R
ELATED
T
ROUBLES
U
SING
TCP/IP
When a problem occurs in the TCP/IP environment refer to the Reference Guide.
The whole
piece of paper
is printed
black.
The drum/toner cartridge is defective or damaged.
Replace with a new drum/toner cartridge.
“Drum/Toner Cartridge Replacement” on page 39.
This may be due to breakdown of high voltage power.
Contact service.
Nothing is
printed.
Multiple sheets of paper are fed simultaneously. Fan
the paper well and reload.
The drum/toner cartridge is defective/damaged or
there is no more toner inside the cartridge. Replace
with a new drum/toner cartridge.
“Drum/Toner Cartridge Replacement” on page 39.
Spots of
missing text.
This may be due to breakdown of high voltage power.
Contact service.
The paper is damp. Replace with paper from a new
ream.
The paper used is not suitable. Load the correct type
of paper.
See “Usable Paper” in the Reference Guide.
Text is blurred. The paper used is not suitable. Load the correct type
of paper.
See “Usable Paper” in the Reference Guide.
The paper is damp. Replace with paper from a new
ream.
Missing
characters
throughout
the length of
the paper.
The drum/toner cartridge is defective/damaged or
there is no more toner inside the cartridge. Replace
with a new drum/toner cartridge.
“Drum/Toner Cartridge Replacement” on page 39.
Text o r ima g es
are printed at
an angle.
The paper tray guides are not set in the correct
positions. Set the length guide and the right width
guide in the correct positions.
“Loading Paper” on page 27.
Transparencies
and envelopes
are not printed
clearly.
The type of transparency or envelope loaded cannot
be used in this printer. Load the correct type of paper.
See “Usable Paper” in the Reference Guide.
Check that the paper type on the printer driver or the
control panel is correctly set.
See “Setting Paper Types” in the Reference Guide.
The Draft Mode feature is turned on and the resolution
is set at a low level on the printer driver. Change the
settings on the Detailed Settings or Graphics tab of
the printer driver.
SYMPTOM REASON/ACTION
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Oki B730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Oki B730 in the language / languages: English as an attachment in your email.

The manual is 2,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info